Users Guide

9–Windows Driver Software
Installing the Driver Software
95 BC0054508-00 M
Using the Installer
In addition to the Marvell device drivers, the installer installs the management
applications. The following are installed when running the installer:
 QLogic Device Drivers installs the Marvell device drivers.
 Control Suite is the QLogic Control Suite (QCS) CLI.
 QCC is the QConverge Console GUI.
 QLASP installs QLogic Advanced Server Program
1
.
 SNMP installs the SNMP sub agent.
 NX RPC Remote Agent installs the RPC remote agent software.
 iSCSI Crash Dump Driver installs the driver needed for the iSCSI Crash
Dump utility.
 FCoE Crash Dump Driver installs the driver needed for the FCoE Crash
Dump utility.
 FastLinQ HBA Device Mgmt Agent installs the agent for device
management.
To install the Marvell BCM57xx and BCM57xxx drivers and management
applications:
1. When the Found New Hardware Wizard appears, click Cancel.
2. From either the driver source media or from the location in which you
downloaded the software driver package, do the following:
a. Open the folder for your operating system.
b. Open the MUPS folder, and then extract the folder according to your
operating system configuration.
c. Double-click the Setup.exe file.
The InstallShield Wizard for QLogic Drivers and Management Applications
opens to the Welcome window.
1
QLASP is not supported on Windows Server 2016 and later. The option to install it is not available.