Users Guide

10–iSCSI Protocol
iSCSI Boot
105 BC0054508-00 M
 Target IP address
 Target TCP port number
 Target LUN
 Initiator IQN
 CHAP ID and secret
Configuring iSCSI Boot Parameters
To configure the iSCSI boot parameters:
1. In the NIC Configuration page, in the Legacy Boot Protocol drop-down
menu, select iSCSI (see Figure 10-1).
Figure 10-1. Legacy Boot Protocol Selection
As shown in Figure 10-1, UEFI is not supported for the iSCSI protocol for the
BCM57xx and BCM57xxx adapters.