Users Guide

11–Marvell Teaming Services
Event Log Messages
205 BC0054508-00 M
Virtual Bus Driver (VBD)
Table 11-10 lists VBD event log messages.
Table 11-10. Virtual Bus Driver (VBD) Event Log Messages
Message
Number
Severity Message Cause Corrective Action
1 Error Failed to allocate
memory for the device
block. Check system
memory resource
usage.
The driver cannot allo-
cate memory from the
operating system.
Close running applica-
tions to free memory.
2 Informational The network link is
down. Check to make
sure the network cable
is properly connected.
The adapter has lost
its connection with its
link partner.
Check that the net-
work cable is con-
nected, verify that the
network cable is the
right type, and verify
that the link partner
(for example, switch or
hub) is working cor-
rectly.
3 Informational The network link is up. The adapter has
established a link.
No action is required.
4 Informational Network controller
configured for 10Mb
half-duplex link.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
No action is required.
5 Informational Network controller
configured for 10Mb
full-duplex link.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
No action is required.
6 Informational Network controller
configured for 100Mb
half-duplex link.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
No action is required.
7 Informational Network controller
configured for 100Mb
full-duplex link.
The adapter has been
manually configured
for the selected line
speed and duplex set-
tings.
No action is required.