Users Guide

6–Boot Agent Driver Software
Setting Up MBA in a Client Environment
28 BC0054508-00 M
3. To access the Boot Protocol item, press the UP ARROW and DOWN
ARROW keys. If other boot protocols besides Preboot Execution
Environment (PXE) are available, press RIGHT ARROW or LEFT ARROW
to select the boot protocol of choice: FCoE or iSCSI.
4. To move to and change the values for other menu items, as needed, press
the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT ARROW
keys.
5. To save the settings, press the F4 key.
6. When you are finished, press the ESC key.
Using UEFI
To use UEFI to configure the MBA driver:
1. Restart the system.
2. Enter the system BIOS System Setup’s Device Settings configuration
menu (see Figure 6-2).
Figure 6-2. System Setup, Device Settings
NOTE
For iSCSI and FCoE boot-capable LOMs, set the boot protocol through
the BIOS. See your system documentation for more information.
NOTE
If you have multiple adapters in your system and you are unsure which
adapter you are configuring, press the CTRL+F6 keys, which causes
the port LEDs on the adapter to start blinking.