Users Guide

6–Boot from SAN Configuration
iSCSI Boot from SAN
81 AH0054602-00 M
12. If you want to configure a second iSCSI target device, select iSCSI Second
Target Parameters (Figure 6-12), and enter the parameter values as you
did in Step 10. This second target is used if the first target cannot be
connected to.Otherwise, proceed to Step 13.
Figure 6-12. System Setup: iSCSI Second Target Parameters
13. Press ESC once, and a second time to exit.
14. Click Yes to save changes, or follow the OEM guidelines to save the
device-level configuration. For example, click Yes to confirm the setting
change (Figure 6-13).