Users Guide

7–RoCE Configuration
Configuring RoCE on the Adapter for Windows Server
134 AH0054602-00 M
Figure 7-1 shows an example of configuring a property value.
Figure 7-1. Configuring RoCE Properties
Table 7-2. Advanced Properties for RoCE
Property Value or Description
NetworkDirect
Functionality
Enabled
Network Direct Mtu
Size
The network direct MTU size must be less than the
jumbo packet size.
Quality of Service For RoCE v1/v2, always select Enabled to allow Win-
dows DCB-QoS service to control and monitor DCB. For
more information, see “Configuring QoS by Disabling
DCBX on the Adapter” on page 260 and “Configuring
QoS by Enabling DCBX on the Adapter” on page 264.
NetworkDirect
Technology
RoCE or RoCE v2.
VLAN ID Assign any vLAN ID to the interface. The value must be
the same as is assigned on the switch.