Users Guide

Preface
What Is in This Guide
xviii AH0054602-00 M
 Chapter 5 Adapter Preboot Configuration describes the preboot adapter
configuration tasks using the Human Infrastructure Interface (HII)
application.
 Chapter 6 Boot from SAN Configuration covers boot from SAN configuration
for both iSCSI and FCoE.
 Chapter 7 RoCE Configuration describes how to configure the adapter, the
Ethernet switch, and the host to use RDMA over converged Ethernet
(RoCE).
 Chapter 8 iWARP Configuration provides procedures for configuring Internet
wide area RDMA protocol (iWARP) on Windows, Linux, and VMware
ESXi 6.7 systems.
 Chapter 9 iSER Configuration describes how to configure iSCSI Extensions
for RDMA (iSER) for Linux RHEL, SLES, Ubuntu, and ESXi 6.7.
 Chapter 10 iSCSI Configuration describes iSCSI boot and iSCSI offload for
Windows and Linux.
 Chapter 11 FCoE Configuration covers configuring Linux FCoE offload.
 Chapter 12 SR-IOV Configuration provides procedures for configuring single
root input/output virtualization (SR-IOV) on Windows, Linux, and VMware
systems.
 Chapter 13 NVMe-oF Configuration with RDMA demonstrates how to
configure NVMe-oF on a simple network for 41xxx Series Adapters.
 Chapter 14 VXLAN Configuration describes how to configure VXLAN for
Linux, VMware, and Windows Server 2016.
 Chapter 15 Windows Server 2016 describes the Windows Server 2016
features.
 Chapter 16 Windows Server 2019 describes the Windows Server 2019
features.
 Chapter 17 Troubleshooting describes a variety of troubleshooting methods
and resources.
 Appendix A Adapter LEDS lists the adapter LEDs and their significance.
 Appendix B Cables and Optical Modules lists the cables, optical modules,
and switches that the 41xxx Series Adapters support.
 Appendix C Dell Z9100 Switch Configuration describes how to configure the
Dell Z9100 switch port for 25Gbps.
 Appendix D Feature Constraints provides information about feature
constraints implemented in the current release.