Users Guide

5–Adapter Preboot Configuration
Configuring iSCSI Boot
57 AH0054602-00 M
To configure the iSCSI boot configuration parameters:
1. On the Main Configuration Page, select iSCSI Boot Configuration Menu,
and then select one of the following options:
 iSCSI General Configuration
 iSCSI Initiator Configuration
 iSCSI First Target Configuration
 iSCSI Second Target Configuration
2. Press ENTER.
3. Choose values for the appropriate iSCSI configuration parameters:
 iSCSI General Parameters (Figure 5-11 on page 58)
 TCP/IP Parameters Via DHCP
 iSCSI Parameters Via DHCP
 CHAP Authentication
 CHAP Mutual Authentication
 IP Version
 ARP Redirect
 DHCP Request Timeout
 Target Login Timeout
 DHCP Vendor ID
 iSCSI Initiator Parameters (Figure 5-12 on page 59)
 IPv4 Address
 IPv4 Subnet Mask
 IPv4 Default Gateway
 IPv4 Primary DNS
 IPv4 Secondary DNS
 VLAN ID
 iSCSI Name
 CHAP ID
 CHAP Secret
 iSCSI First Target Parameters (Figure 5-13 on page 59)
 Connect
 IPv4 Address
 TCP Port
 Boot LUN
 iSCSI Name
 CHAP ID
 CHAP Secret