Users Guide

3–Adapter Management Applications
Windows Management Applications
87 CU0354602-00 M
To remove an adapter from a team:
1. On the Team Management property page, right-click the adapter to be
removed from the team.
2. On the shortcut menu, click Remove from Team.
At least two adapters must be present in a team. If an adapter is no longer
required to be a member of a team, it can be removed from the team.
To change a team property:
For the VLAN and teaming solution to work correctly, the properties of all teamed
adapters and adapters with multiple VLANs must remain synchronized with the
team properties. Ensure that you change the properties of a team and an adapter
with VLANs only on the Team Management page.
1. On the Team Management page, in the right pane under Team Data,
expand the Properties list.
2. Double-click the team property you need to change.
3. In the Advanced Team Properties dialog box (see Figure 3-10), specify a
new Property Value and then click OK.
Figure 3-10. Modifying Advanced Team Properties
The team properties change takes effect immediately. Changing team properties
causes the driver to reload, which might result in a momentary loss of connectivity.
NOTE
A team must include at least one QLogic adapter. A QLogic adapter is
allowed to be deleted from a team only if it is not the last QLogic teamed
adapter.