Users Guide

4–Switch Independent Partitioning
Switch Independent Partitioning Setup and Management Options
152 CU0354602-00 M
The Security Check dialog box might appear. In the Enter Password box,
type the password and then click OK.
View eSwitch Configuration
QConvergeConsole appears and lets you view the current eSwitch offload
settings. The eSwitch configuration is not persistent across reboots and driver
reloads; however, you can save the configuration before the reboot/reload and
restore it at a later time.
To view the eSwitch configuration:
1. Expand a QLogic adapter node in the QConvergeConsole system tree.
2. Expand the physical port 1 node and select the NIC port. The content pane
displays tabs that are not available on NIC ports for physical port 2.
3. Select the NIC Partitioning tab.
4. Select the eSwitch subtab.
The NIC Partitioning eSwitch Management page displays offload
configuration settings that apply to the selected port (see Figure 4-17).
Figure 4-17. NIC Partitioning—eSwitch Management Page
5. Select the port for which you want to set the offload properties from the
drop-down menu.
The listed offload fields apply to the selected port.
NOTE
The settings are persistent across reboots.