Users Guide

3– アダプター管理アプリケーシ ョ ン
QConvergeConsole による一般的な管理
58 CU0354602-04 M
IP_Address :192.168.105.208
IP_Subnet_Mask :255.255.255.0
IP_Gateway :192.168.105.178
Secondary_DNS :(*)
Secondary_IP_Address :(*)
Task_Management_Timeout :10
ENABLE_IPV4 :on
ENABLE_IPV6 :off
LOC_LINK_AUTO :off
ROUTABLE_AUTO :off
LDROUTER_AUTO :off
IPv6_Addr_Local_link :fe80::
ENABLE_4022IPV4 :on
*** Displaying Advanced Settings inst=0 ***
FW_Marker :on(*)
FW_Stat_Alarm :off(*)
FW_Accept_AEN :off(*)
FW_Access_Control :off(*)
FW_Session_Mode :on(*)
FW_Initiator_Mode :on(*)
FW_Target_Mode :off(*)
FW_Fast_Posting :off(*)
FW_Sense_Buffer_Desc :off(*)
FW_ZIO_Enable_Mode :off
AFW_Device_Timeouts :on
AFW_Delayed_Ack :off
AFW_AutoConnect :on
DevType :0(*)
ExeThrottle :0
FirstBurstLen :32
IP_Fragmentation :on(*)
IP_ARP_Redirect :off
VLAN_Enable :off
VLAN_User_Priority :0
VLAN_ID :0
IPv4_TOS_ENABLE :off
Force_Negotiate_Main_iSCSI_Keys :off
iSCSI_Send_Markers :off(*)
iSCSI_Header_Digests :off
iSCSI_Data_Digests :off
iSCSI_Immediate_Data :on
iSCSI_Initial_R2T :off
iSCSI_Data_Seq_In_Order :on(*)
iSCSI_Data_PDU_In_Order :on(*)
iSCSI_CHAP_Auth :off(*)
iSCSI_Bidi_CHAP_Auth :off(*)
iSCSI_Error_Recovery_Level :0(*)
KeepAliveTO :30
DefaultTime2Retain :20(*)
DefaultTime2Wait :2(*)
MaxBurstLen :512
MaxOutstandingR2T :1
MaxRxDataSegmentLen :128(*)
Port :3260(*)
TCP_Timer_Scale :0(*)
TCP_Time_Stamp :on