Users Guide
Table Of Contents
- Table of Contents
- Preface
- Part I General CLI Information
- Part II Noninteractive Commands
- 4 General Noninteractive Commands
- 5 Fibre Channel Noninteractive Commands
- Displaying System Information (Command Line Options -g, -z)
- Command Format
- Command Summary
- -a
- -b (Flash Update; Save Flash)
- -bbcr (BB Credit Recovery)
- -c (Display HBA Parameters)
- -ctp (CT Ping Test)
- -d (Driver Update)
- -dm (Transceiver Diagnostics Monitoring Interface [DMI])
- -dp (Diagnostic Port Test)
- -dport (Diagnostics Port)
- -e (Boot Devices Configuration)
- -ei
- -f
- -fcep (Diagnostics FC Ping [ELS Echo Ping])
- -fcp (Ping Test)
- -fec (FEC Enable/Disable)
- -fg (Display Driver Persistent Binding Settings)
- -ftr (CT FTR Test)
- -fs (Driver Parameters)
- -fwdump (Firmware Dump)
- -g
- -gs (Configure Parameters [Monitoring])
- -h (Help)
- -ha (Adapter Alias [FCoE Configuration])
- -i (FC Adapter Information; FC VPD Information; FC VFC Information)
- -kl (Loopback Test)
- -kr (Read Write Buffer Test)
- -l (FC Target/LUN Information)
- -ls (Display Parameters [HBA Statistics]; Link Status)
- -m (Selective LUNs)
- -mbiv (Flash/MBI Information)
- -n (Configure HBA Parameters)
- -o (Redirect Standard Output To a File)
- -p (Target Persistent Bindings)
- -pa (Adapter Port Alias [FCoE Configuration])
- -pc (Adapter Personality Change)
- -pl (Persistent Names [udev] – Linux only)
- -q (Target Link Speed [iiDMA])
- -qos (Quality of Service [QoS])
- -r (Parameters Update; Save HBA Parameters)
- -rdp (Read Diagnostics Parameter)
- -s (Suppress Output [Silent Mode])
- -scm (Congestion Management)
- -sp (FC Board Config Update)
- -t (FC Target/LUN Information)
- -tb (Target Beacon)
- -tm (Temperature Monitor)
- -tp (Topology)
- -trace (FCE Trace)
- -u (Firmware Preload Table Update)
- -v (QCC CLI Version Information)
- -vp (Virtual Ports [NPIV])
- -x (XML Output [Legacy])
- -x2 (XML Output)
- -z (All Information)
- Part III Interactive Commands
- 6 Fibre Channel Interactive Commands
- Adapter Information
- Adapter Configuration
- Adapter Alias (-ha)
- Adapter Port Alias (-pa)
- HBA Parameters
- Target Persistent Binding (-p)
- Persistent Names (-pl)
- Boot Devices Configuration
- Virtual Ports (NPIV) (-vp)
- Target Link Speed (iiDMA)) (-q)
- Driver Parameters (-fs)
- Selective LUNs (-m)
- Quality of Service (QoS) (-qos)
- Export (Save) Configuration
- Generate Reports
- Personality (-pc)
- FEC (-fec)
- BB Credit Recovery (-bbcr)
- Adapter Updates
- Adapter Diagnostics
- Monitoring
- Refresh
- Help (-h)
- Exit
- A Revision History
- 6 Fibre Channel Interactive Commands
- Glossary
User’s Guide—QConvergeConsole CLI
2500, 2600, 2700 Series Fibre Channel Adapters
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 214 Copyright © 2021 Marvell
VLAN
Virtual LAN. A group of hosts with a
common set of requirements that commu-
nicate as if they were attached to the same
wire, regardless of their physical location.
Although a VLAN has the same attributes
as a physical LAN, it allows for end
stations to be grouped together even if
they are not located on the same LAN
segment. VLANs enable network reconfig-
uration through software, instead of physi-
cally relocating devices.
VM
Virtual machine. A software implementa-
tion of a machine (computer) that executes
programs like a real machine.
VPD
Vital product data. Information provided by
the manufacturer about the current
working adapter. Information varies by
manufacturer, or may not be provided at
all.
wake on LAN
See WoL.
WoL
Wake on LAN. An Ethernet computer
networking standard that allows a
computer to be remotely switched on or
awakened by a network message sent
usually by a simple program executed on
another computer on the network.
world wide name
See WWN.
world wide node name
See WWNN.
world wide port name
See WWPN.
world wide unique LUN name
See WWULN.
WWN
World wide name. A unique 64-bit address
assigned to a device by the device
manufacturer.
WWNN
World wide node name. A unique 64-bit
address assigned to a device.
WWPN
World wide port name. A unique 64-bit
address assigned to each port on a
device. One WWNN may contain multiple
WWPN addresses.
WWULN
World wide unique LUN name. Identifiers
for SCSI devices are read from page 83
and page 80 of your SCSI block device as
based on the SCSI standard.