Users Guide

5–Fibre Channel Noninteractive Commands
-kl (Loopback Test)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 60 Copyright © 2021 Marvell
-kl (Loopback Test)
Use the -kl command to perform an external loopback test.
To perform a loopback test using the default parameters, issue the following
command:
qaucli -pr fc -kl <hba instance>|<hba wwpn>
To do an external loopback test with custom parameters, issue the following
command:
# qaucli -pr fc -kl <hba instance>|<hba wwpn>
[<param name>|<param alias>) <param value>]
Where:
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<param name> = One of the following parameter names:
 DataPattern
 DataSize
 Tes tC ount
 TestIncrement
 OnError
 LoopbackType
<param alias> = One of the following parameter aliases:
 DP
 DS
 TC
 TI
 OE
 LT
<param value> = Value of parameter or alias (see Table 5-6 on page 64)