Users Guide

5–Fibre Channel Noninteractive Commands
-kr (Read Write Buffer Test)
Doc. No. TD-000947 Rev. 1
Janurary 29, 2021 Page 61 Copyright © 2021 Marvell
-kr (Read Write Buffer Test)
Use the -kr command to run a read/write buffer test.
To run a read/write test using the default parameters, issue the following command :
# qaucli -pr fc -kr <hba instance>|<hba wwpn>
To run a read/write test with customized parameters, issue the following command :
# qaucli -pr fc -kr <hba instance>|<hba wwpn> [-ex|-exclude
<target wwpn>] <param name>|<param alias> <param value>
Where:
NOTE
To stop an active diagnostic test, press ENTER. To use a different key to
stop tests, modify this line in the sfcli.properties configuration file:
Default:node.app.diag.ascii.abortkey=CR
Custom:node.app.diag.ascii.abortkey=<stop key>
Where <stop key> is a–z or A–Z (press SHIFT for uppercase).
Example of lowercase stop key:
node.app.diag.ascii.abortkey=s (Press S to stop test)
Example of uppercase stop key:
node.app.diag.ascii.abortkey=S (Press SHIFT+S to stop test)
<hba instance> = Adapter number (use the -g command to find)
<hba wwpn> = World wide port name of the adapter
<target wwpn> = World wide port name of the target device that is excluded from
the read/write test
<param name> = One of the following parameter names:
 DataPattern
 DataSize
 Tes tC ount
 TestIncrement
 OnError