Users Guide

5–Managing Marvell 578xx and 41000 Series Adapters
Configuring Port Boot Options
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 102 Copyright © 2021 Marvell
g. Select the appropriate Link Speed option:
 AutoNeg (auto negotiation)
 SmartAN (smart auto negotiation (if available))
 1Gbps
 10Gbps
 25Gbps (if available)
 40Gbps (if available)
 50Gbps (if available)
 100Gbps (if available)
h. Select the Pre-boot Wake on LAN check box to enable the Pre-boot
Wake on LAN option, or clear the check box to disable it.
i. Select the VLAN Mode check box to enable VLAN Mode, or clear the
check box to disable it.
j. Set a value (from 1 to 4094) in the VLAN ID (1..4094) box.
k. Set a value (from 0 to 7) for the Boot Retry Count option.
5. Click Save.
Figure 5-10 shows the boot configuration pane for MBA parameters.
Figure 5-10. Boot Configuration Panel for MBA Parameters