Users Guide

4–Using the vCenter Server Plug-in
Managing Hosts
Doc. No. TD-000965 Rev. 1
January 21, 2021 Page 30 Copyright © 2021 Marvell
Setting Ethernet Parameters
Next to Parameter, click Ethernet to view and edit Ethernet parameters for the
selected host, as shown in Figure 4-5.
Figure 4-5. Host View—Ethernet Parameters
The General information section at the top of the window contains the following:
 System OS: Name and version of the host operating system
 System Vendor: Name of host manufacturer
 System Model: Model name of host
 Provider Version: Version of the CIM Provider
 NIC Driver Version: Version of the NIC driver
The Parameters section contains the following configurable parameters:
 Enable automatic firmware recovery: Select the check box to enable
automatic firmware recovery, or clear the check box to disable this feature.
 Enable TCP Segmentation Offload (TSO): Select the check box to enable
TCP segmentation offload, or clear the check box to disable this feature.
 Enable hardware VLAN support: Select the check box to enable hardware
VLAN, or clear the check box to disable this feature.
 Enable hardware Large Receive Offload (LRO): Select the check box to
enable hardware LRO, or clear the check box to disable this feature.