Users Guide

1 CU0354604-00 R
1 Hardware Installation
This chapter provides the hardware and software requirements, safety
precautions, a pre-installation checklist, PCIe slot considerations, and procedures
for installing the adapter and connecting it to the network.
Hardware and Software Requirements
Before you install the adapter, verify that the system meets the following hardware
and software requirements.
 Hardware:
 For QLE2660-DEL, QLE2662-DEL, QLE2690-DEL, QLE2690L-DEL,
QLE2692-DEL, and QLE2692L-DEL adapter port and slot
assignments, refer to the “Expansion Cards” section of the Hardware
Owner’s Manual for your Dell PowerEdge server.
 For QME2662-DEL and QME2692-DEL adapter port and slot
assignments, refer to the blade and M1000e chassis diagram in the
Dell PowerEdge M1000e Systems Configuration Guide.
 Software: For information on the supported operating systems, firmware
versions, adapter drivers, and utilities, refer to the product release notes.
Safety Precautions
For your safety, follow these precautions:
 Remove any metallic objects or jewelry from your hands and wrists.
 Make sure to use only insulated or nonconducting tools.
!
WARNING
The adapter is being installed in a system that operates with voltages that
can be lethal. Before you open the case of your system, observe the
following precautions to protect yourself and to prevent damage to the
system components.