Users Guide

3–Fibre Channel Configuration
Configuring Virtual Ports (NPIV)
51 CU0354604-00 R
To set the QoS by bandwidth speed with QConvergeConsole GUI:
1. In the QConvergeConsole tree pane on the left, expand a 2600 Series
Adapter.
2. Select a virtual port.
3. In the content pane on the right, click the QoS tab.
4. In the QoS Type box, select Bandwidth.
5. In the View By box, select Bandwidth Speed.
6. Move the slider to select the bandwidth speed, as shown in Figure 3-9.
Figure 3-9. Setting the QoS by Bandwidth Speed
7. Click Save.
To set the QoS by bandwidth speed with interactive QConvergeConsole CLI:
1. On the Fibre Channel Adapter Configuration menu, select the QoS
option.
2. From the port menu, select a port to open the QoS Type Menu.
Select 2: QoS Bandwidth to set the bandwidth speed.