Users Guide

3–Fibre Channel Configuration
Setting an FA-PWWN
65 CU0354604-00 R
Changing the ESXi Queue Depth
The default queue depth value on ESXi is 64 and the range is 0–65535.
To change the default value:
1. Issue the following command:
$ esxcfg-module -s "ql2xmaxqdepth=X" qlnativefc
where X is the new queue depth value.
2. Restart the system.
Setting an FA-PWWN
This section provides the following information for fabric-assigned port world wide
(FA-PWWN) name:
 Setting the FA-PWWN from the Adapter
 Setting the FA-PWWN from the Brocade Switch
Setting the FA-PWWN from the Adapter
From the adapter side, you can set the FA-PWWN using the following utilities:
 Setting FA-PWWN with QConvergeConsole GUI
 Setting FA-PWWN with QConvergeConsole CLI
 Setting FA-PWWN with QConvergeConsole VMware Plug-ins