Getting Started Guide

8 Getting Started Guide
Figure 1-1. NIC Connector
Configuring Your System Using a Keyboard,
Monitor, and Mouse
NOTE: Depending on your method of configuration, local KVM connections
may be required to complete the installation and configuration procedures.
If your remote system can complete the configuration procedures, local KVM
connections are not required for operation.
1 Connect a keyboard, monitor, and mouse to the NAS system.
For information about system connectors, see your system’s
User’s
Guide
.
2 Push the power button to turn on the NAS system.
3 Log in to the NAS system.
NOTE: The default administrator user name is administrator
and the default password is storageserver.
NIC 2 LED
NIC 1 LED
NIC 1
NIC 2