Getting Started Guide

Getting Started Guide 13
4 In the Setup Type window, select the appropriate setup type for your
configuration and click Next.
5 In the Ready to Install window, click Install .
6 In the Install Wizard Completed window, click Finish .
Accessing Server Administrator
You can access Server Administrator locally through the host by double-
clicking the Server Administrator icon on the desktop.
To access Server Administrator directly from a client system on the same
network, open Internet Explorer 6.0 or later and connect to the secure
port, 1311, of your NAS system.
For example, type:
https://DELL1234567:1311
where DELL1234567 is the name of your NAS system.
If port 1311 is disabled by the firewall, use the following procedure to set
an exception to enable port 1311 for OpenManage use.
1 Click Start and select Settings→ Control Panel→ Windows
Firewall
.
2 Click the Exceptions tab.
3 Click on Add port .
4 Ty p e Dell OpenManage Server Administrator
in the
Name field.
5 Ty p e 1311 in the Port number field.
6 Click OK .
7 If prompted, restart the firewall service.