Installation manual

20 Installing Your Operating System
14 When prompted, insert the Microsoft Windows Server 2003 R2
Datacenter x64 Edition with SP2 Disk 1
CD into the CD drive.
The
Dell OpenManage Server Assistant automatically detects the CD
and begins copying the operating system files.
NOTE: This procedure may take several minutes to complete.
15 When prompted, remove the media from the CD drive, and click
Finish .
Your system automatically restarts, Windows Setup appears in
text
mode, and the installation continues.
NOTE: If Console Redirection is enabled in the System Setup program,
you are prompted for an administrator password in the text mode of
Windows Setup. Enter an administrator password and press <Enter> to
continue. The Emergency Management System window appears. Click OK
to continue.
Windows Setup automatically and restarts your system, and the
Windows Setup window appears.
Windows Setup completes the installation and restarts your system.
16 In the Log On window, type your administrator password, and
click
OK .
The system prompts you to install the
Windows Server 2003 R2
Disk 2
CD.
NOTE: If you want to install the optional R2 components, click OK and
then see the "Installing the R2 Components" section to complete the
installation.
17 Click Cancel to proceed with the operating system installation without
installing the optional R2 components.
A Windows Setup dialog box appears with directions on how to
continue with the second CD install at a later time.
18 Click OK .
The
Windows Server Post-Setup Security Updates window appears.
NOTE: At this time, your Windows firewall is active. Dell recommends that you
update your system with the latest critical security updates and configure
Automatic Updates before you click Finish.
book.book Page 20 Tuesday, February 20, 2007 7:13 PM