Installation manual

8 Installing Your Operating System
Using the DRAC Diskette Image
Install the Dell mass storage drivers using Dell Remote Access Card
(DRAC) 4 or DRAC 5 diskette images located on the Dell Support
website at support.dell.com. See the DRAC documentation that is
shipped along with your server to set up virtual diskette drive media.
NOTE: You can install drivers using this procedure only if your server has
a DRAC installed and configured.
Using the Dell USBKeyPrepF6 Utility
This section describes how to prepare a Universal Serial Bus (USB) key for use
with the F6 prompt on Dell mass storage devices. The Dell
USBKeyPrepF6
Utility helps you to prepare a USB key to use with the F6 prompt only
during the installation of Windows Server 2003 operating systems.
1
Go to the Dell Support website located at support.dell.com .
2 Click Drivers and Downloads .
3 You can either enter your Service Tag or choose the Product Type and
Product Model. After you enter this information, click
Go .
4 From the Choose Operating System Type drop-down menu, select
your version of the Microsoft Windows Server 2003 operating system.
5 Click Find Downloads .
6 Expand the group titled System and Configuration Utilities .
7 Click Dell USBKeyPrepF6 Utility .
8 Download the utility and unzip it.
9 Follow the instructions in the readme.txt file.
NOTICE: All data on the USB key will be erased when you format it using
this utility.
book.book Page 8 Tuesday, February 20, 2007 7:13 PM