Setup guide

Configuring Your Operating System 9
14 If you selected Custom settings in the previous step and need to install
additional network components, perform the following steps in the
Networking Components window. If you selected Typical settings ,
go to step 15.
a Click Install .
The
Select Network Component Type window appears.
b Select the type of network component, and click Add .
c Select a network component or network service, and click OK .
The
Networking Components window appears.
15 Click Next .
The
Workgroup or Computer Domain menu appears.
16 Select one of the following options:
–
No, this computer is not on a network, or is on a network without a
domain. Make this computer a member of the following workgroup:
Requires you to assign a workgroup name to your system.
Choosing this selection allows any system on the LAN with the
same workgroup name to connect to your system.
Enter a workgroup name and click
Next .
– Yes, make this computer a member of the following domain:
Enter the appropriate domain name and click Next . The Join
Computer to
<your_domain_name> Domain window appears.
Enter a domain administrator username and password, and
click
OK .
NOTE: You must have administrator rights to join the domain.
Windows Setup begins installing the network components.
Windows Setup continues the installation procedures and then restarts
your system.
NOTE: This procedure may take several minutes to complete.
The Welcome to Windows window appears.