White Paper

CablingtheDell™PowerEdge™R710

 Page7

Figure7:ReplacingOuterPowerSupply












CablingaPowerEdgeR710InstalledinStaticRails
NOTE:TheCMAisonlycompatiblewithslidingrails,andnotwithstaticrails.
1. FollowtheinstructionsintheRackInstallationGuideincludedinthestaticrailkittoinstalltheserverintoa2‐
postor4‐postrack.
2. Verifythatthehookandloopsstrapsprovidedwith
thestaticrailkitareinstalledtotherearoftherails.
3. Pluginallapplicablecablestotherearofthesystemandverifythatallconnectionsaresecure.
4. Usingthehookandloopstrapssuppliedwiththerailkit,bundlethecablesandsecurethemto
eithertheleft
railorrightrailasdescribedintheRackInstallationGuide.SeeFigure8.
Figure8:CablingaSystemInstalledinStaticRails








Inner CMA attachment
housing has been
disconnected