DRM_QIG.book Page 1 Sunday, December 4, 2011 10:48 PM Dell Repository Manager Version 1.
DRM_QIG.book Page 2 Sunday, December 4, 2011 10:48 PM Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. ____________________ Information in this publication is subject to change without notice. © 2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
DRM_QIG.book Page 3 Sunday, December 4, 2011 10:48 PM 1 Introduction This guide describes how to quickly install the Dell Repository Manager (Repository Manager) on desktops, laptops, or servers running the supported version of Microsoft Windows operating systems.
DRM_QIG.book Page 4 Sunday, December 4, 2011 10:48 PM 5 From the Operating System drop-down, select the operating system running on the system. 6 Under the Results for section, expand the Systems Management category. 7 Adjacent to Dell - Repository Manager, click Download File. 8 In the File Title(s) column, click the .msi file, and then click Download. 9 In the Download Options window, click the option for which you want to download Repository Manager and then click Download.
DRM_QIG.book Page 5 Sunday, December 4, 2011 10:48 PM For 64-bit Windows operating system, the default location is C:\Program Files(x86)\Dell\Dell Repository Manager v. For example: C:\Program Files(x86)\Dell\Dell Repository Manager v1.4. 7 Click Install to begin the installation. NOTE: During an upgrade, ensure that the existing version of Repository Manager is closed. NOTE: During an upgrade, the existing repositories and settings are retained.
DRM_QIG.book Page 6 Sunday, December 4, 2011 10:48 PM Running Repository Manager You can run Repository Manager from your desktop, from the Start menu or, from the folder location where you have installed it: To run Repository Manager from the folder location on your system: 1 Navigate to the location where the RepositoryManager.exe is located, and double-click it.
DRM_QIG.book Page 7 Sunday, December 4, 2011 10:48 PM Running Repository Manager Using Command Line Options You can also run Repository Manager using the following command line options: • RepositoryManager.exe to load a specific repository at start up. • RepositoryManager.exe -server to launch the application in Server mode. or • RepositoryManager.exe -client to launch the application in Client mode. NOTE: You cannot modify the repositories loaded using the command line option.
DRM_QIG.
