Users Guide

The Night Mode window displays.
3. Click the Color Choices tab and select a Control Center color to use while in Night Mode.
4. To close the Dashboard, click at the top of the Ribbon or the in the upper right of the Dashboard.
Set keyboard backlight color
Set the color of your keyboard backlight while in Night Mode.
1.
Click at the top of the Ribbon.
The Dell Rugged Control Center Dashboard is displayed.
2. At the top of the Dashboard, click the Settings tab, and then click the Night Mode tab on the left side of the Dashboard.
The Night Mode window is displayed.
3. Click the Color Choices tab and select a keyboard backlight color to use while in Night Mode.
NOTE: The values for this parameter are fetched from the values set in Backlight Colors section available in the
Keyboard Backlight tab.
4. To close the Dashboard, click at the top of the Ribbon or the in the upper right of the Dashboard.
Set LCD brightness level
Set the LCD brightness level to use while in Night Mode.
1. Click at the top of the Ribbon.
The Dell Rugged Control Center Dashboard is displayed.
2. At the top of the Dashboard, click the Settings tab, and then click the Night Mode tab on the left side of the Dashboard.
The Night Mode window is displayed.
3. Click the Color Choices tab and select the LCD brightness level to use while in Night Mode using the slider control. Move the slider
left to decrease the brightness level, and move the slider right to increase the brightness level of the LCD.
4. To close the Dashboard, click at the top of the Ribbon or the in the upper right of the Dashboard.
Set keyboard backlight intensity
To set the intensity level of your keyboard backlight while in Night Mode.
1. Click at the top of the Ribbon.
The Dell Rugged Control Center Dashboard is displayed.
2. At the top of the Dashboard, click the Settings tab, and then click the Night Mode tab on the left side of the Dashboard.
The Night Mode window is displayed.
3. Click the Color Choices tab and select a keyboard intensity level to use while in Night Mode. Choose between 0%, 25%, 50%, 75%,
and 100%.
4.
To close the Dashboard, click at the top of the Ribbon or the in the upper right of the Dashboard.
Set automatic schedule
To set up an automatic schedule for Night Mode, do the following:
1. Click at the top of the Ribbon.
The Dell Rugged Control Center Dashboard is displayed.
2. At the top of the Dashboard, click the Settings tab, and then click the Night Mode tab on the left side of the Dashboard.
The Night Mode window is displayed.
3. Click the Auto Schedule tab and select the day and time when you want to turn on and off Night Mode.
4. To close the Dashboard, click at the top of the Ribbon or the in the upper right of the Dashboard.
20
Customizing settings in Dell Rugged Control Center