User Manual

Installing the memory module
1. Insert the memory module into the memory connector at a 30 degree angle until the contacts are fully seated into the slot.
Then, press the module until the clips secure the memory module.
2. Install the :
a. battery
b. base cover
3. Follow the procedure in After working inside your computer.
Keyboard lattice and Keyboard
Removing keyboard lattice
1. Follow the procedure in Before working inside your computer.
2. Pry the keyboard lattice from one of the recess points [1] and lift the lattice from the system [2].
NOTE: Gently pull or lift keyboard lattice in clockwise or anticlockwise direction to avoid breakage.
Installing keyboard lattice
1. Place the keyboard lattice on the keyboard and press along the edges and in between the rows of keys until the lattice clicks
in place.
2. Follow the procedure in After working inside your computer.
24
Removing and installing components