User Manual
Table Of Contents
- Latitude 5490 Owner’s Manual
- Contents
- Working on your computer
- Removing and installing components
- Recommended tools
- Screw size list
- Subscriber Identity Module(SIM) board
- Base cover
- Battery
- Solid State Drive — optional
- Hard drive
- Coin-cell battery
- WLAN card
- WWAN card – optional
- Memory modules
- Keyboard lattice and Keyboard
- Heat sink
- System fan
- Power connector port
- Chassis frame
- SmartCard module
- Speaker
- System board
- Display hinge cover
- Display assembly
- Display bezel
- Display panel
- Display (eDP) cable
- Camera
- Display hinges
- Display back cover assembly
- Palm rest
- Technical specifications
- Technology and components
- System setup options
- BIOS overview
- Entering BIOS setup program
- Navigation keys
- One time boot menu
- Boot Sequence
- System Setup overview
- Accessing System Setup
- General screen options
- System Configuration screen options
- Video screen options
- Security screen options
- Secure Boot screen options
- Intel Software Guard Extensions
- Performance screen options
- Power Management screen options
- POST Behavior screen options
- Manageability
- Virtualization support screen options
- Wireless screen options
- Maintenance screen options
- Updating the BIOS
- System and setup password
- Clearing CMOS settings
- Clearing BIOS (System Setup) and System passwords
- Software
- Troubleshooting
- Contacting Dell
a. base cover
b. battery
c. WLAN card
d. WWAN card (optional)
e. display hinge cover
f. display assembly
g. display bezel
h. display panel
3. Disconnect the camera cable from the connector on the camera module [1].
4. Peel the display cable to release it from adhesive and lift the display cable from the display back cover [2].
Installing display cable
1. Affix the display cable to the display back cover.
2. Connect the camera cable to the connector on camera module.
3. Install the:
a. display panel
b. display bezel
c. display assembly
d. display hinge cover
e. WLAN card
f. WWAN card (optional)
g. battery
h. base cover
4. Follow the procedure in After working inside your computer.
48
Removing and installing components