Sổ hướng dẫn sử dụng Dell S2218M/S2318M Số mẫu: S2218M/S2318M Mẫu quy định: S2218Mc/S2318Mc
Lưu ý, Chú ý và Cảnh báo LƯU Ý: LƯU Ý cho biết thông tin quan trọng giúp bạn sử dụng máy tính hiệu quả hơn. CHÚ Ý: LƯU Ý cho biết thiệt hại tiềm ẩn đối với phần cứng hoặc mất dữ liệu nếu bạn không thực hiện theo các hướng dẫn. CẢNH BÁO: CẢNH BÁO cho biết nguy cơ gây thiệt hại tài sản, tổn thương cơ thể hoặc gây tử vong. _________________________ Thông tin trong tài liệu này có thể thay đổi mà không cần thông báo. © 2017 Dell Inc. Bảo lưu mọi bản quyền.
Mục lục Giới thiệu màn hình.............................................................5 Phụ kiện đóng gói...............................................................................5 Tính năng sản phẩm..........................................................................6 Nhận biết các bộ phận và nút điều khiển...........................................8 Tính năng Cắm Là Chạy..................................................................
Cài đặt độ phân giải tối đa................................................................31 Sử dụng chức năng Nghiêng...........................................................32 Khắc phục sự cố...............................................................33 Tự kiểm tra.......................................................................................33 Chẩn đoán tích hợp..........................................................................34 Các sự cố thường gặp.................................
Giới thiệu màn hình Phụ kiện đóng gói Màn hình của bạn được gửi kèm các phụ kiện như liệt kê dưới đây. Đảm bảo bạn đã nhận tất cả các phụ kiện này và Liên hệ Dell nếu thiếu phụ kiện nào. LƯU Ý: Một số phụ kiện có thể tùy chọn và không được gửi kèm màn hình của bạn. Một số tính năng hoặc phương tiện có thể không có sẵn ở một số quốc gia.
∞∞ Cáp VGA ∞∞ Kẹp giữ cáp ∞∞ Hướng dẫn cài đặt nhanh ∞∞ Thông tin an toàn và quy định Tính năng sản phẩm Màn hình phẳng Dell S2218M_S2318M sử dụng công nghệ ma trận động, Bóng bán dẫn dạng phim mỏng (TFT), Màn hình tinh thể lỏng (LCD), tấm nền Chuyển hướng trong mặt phẳng (IPS) và đèn nền LED. Các tính năng màn hình bao gồm: ∞∞ S2218M: hiển thị vùng xem 54,61 cm (21,5 inch) (đo theo đường chéo). Độ phân giải 1920 x 1080 với khả năng hỗ trợ toàn màn hình cho độ phân giải thấp hơn.
∞∞ Tối ưu hóa sự thoải mái của mắt nhờ màn hình chống nháy và tính năng ComfortView - vốn giúp giảm thiểu phát xạ ánh sáng xanh.
Nhận biết các bộ phận và nút điều khiển Mặt trước 1 2 Các nút điều khiển ở mặt trước Nhãn Mô tả 1 Nút chức năng (Để biết thêm thông tin, xem Sử dụng màn hình) 2 Nút bật/tắt nguồn (kèm theo đèn báo LED) LƯU Ý: Đối với màn hình có mặt vát bóng láng, người dùng nên cân nhắc đến việc lắp đặt màn hình vì mặt vát có thể gây ra phản ứng nhiễu loạn từ các bề mặt sáng và ánh sáng xung quanh.
Mặt sau S2218M S2218M 12V 12V S2218M S2218M S2218Mc 3.33A 12V S2218Mc 3.33A 12V 3.33A 3.33A S2218Mc S2218Mc 1 3 2 4 Mặt sau không có giá đỡ màn hình Nhãn Mô tả 5 Mặt sau với giá đỡ màn hình Sử dụng 1 Khe khóa an toàn Giữ chặt màn hình bằng khóa an toàn (khóa an toàn không kèm theo màn hình). 2 Nhãn quy định (bao gồm số seri kèm Mã vạch và Nhãn thẻ bảo trì) Liệt kê các thông số chấp nhận theo quy định.
Mặt bên Mặt dưới 1 2 3 Mặt dưới không có giá đỡ màn hình Nhãn Mô tả Sử dụng 1 Cổng cắm adapter nguồn Để cắm cáp nguồn màn hình bằng adapter chuyển tiếp DC 12V. 2 Cổng DVI-D(HDCP) Kết nối máy tính với màn hình bằng cáp DVI. 3 Cổng VGA Để kết nối máy tính với màn hình bằng cáp VGA.
Tính năng Cắm Là Chạy Bạn có thể lắp đặt màn hình vào bất kỳ hệ thống nào tương thích với chuẩn Cắm Là Chạy (Plug and Play). Màn hình tự động cung cấp cho hệ thống máy tính Dữ Liệu Nhận Dạng Màn Hình Mở Rộng (EDID) liên quan qua các giao thức Kênh Dữ Liệu Hiển Thị (DDC) để hệ thống có thể tự định cấu hình và tối ưu hóa các cài đặt màn hình. Phần lớn các cài đặt màn hình đều là tự động, bạn có thể chọn các cài đặt khác nếu muốn.
Lắp đặt màn hình Cắm giá đỡ LƯU Ý: Giá đỡ được tháo ra khi vận chuyển màn hình từ nhà máy. LƯU Ý: Các bước sau áp dụng cho màn hình có giá đỡ. 1 2 1 Để lắp giá đỡ màn hình: 1. Lắp thanh đứng vào bệ chân đế, sau đó siết vít vào chân đế. 2. Lắp hai vấu phía trên thanh đứng vào rãnh trên mặt sau của màn hình. Ấn giá đứng cho tới khi giá được khóa cố định.
Kết nối màn hình CẢNH BÁO: Trước khi bắt đầu bất cứ quy trình nào ở phần này, hãy tuân thủ Hướng dẫn an toàn. LƯU Ý: Không được cắm mọi loại cáp vào máy tính cùng một lúc. Để kết nối màn hình với máy vi tính: 1. Tắt máy tính và ngắt cáp nguồn. 2. Cắm cáp kết nối màn hình màu trắng (DVI kỹ thuật số) hoặc màu xanh dương (VGA tương tự) vào cổng video tương ứng phía sau máy tính của bạn. Không dùng cùng lúc cả hai loại cáp này trên cùng một máy tính.
Bố trí các loại cáp Sau khi bạn cắm mọi loại cáp cần thiết vào màn hinh và máy tính, hãy bố trí mọi loại cáp như hình minh họa ở trên. LƯU Ý: Sau khi kết nối các loại cáp, bạn cần phải ngắt kết nối chúng thêm lần nữa để chuyển chúng qua lỗ.
Tháo giá đỡ màn hình LƯU Ý: Để tránh màn hình LCD bị trầy xước trong khi tháo giá đỡ, đảm bảo đặt màn hình trên bề mặt mềm và sạch sẽ. LƯU Ý: Các bước sau áp dụng cho màn hình có giá đỡ. 2 2 3 Để tháo giá đỡ: 1. Đặt màn hình lên khăn mềm hoặc nệm lót. 2. Dùng tua vít dài và mỏng để đẩy chốt nhả. 3. Một khi chốt đã được nhả, hãy tháo đế giữ ra khỏi màn hình.
Sử dụng màn hình Bật nguồn màn hình Nhấn nút để bật màn hình. Sử dụng các nút điều khiển mặt trước Dùng các nút điều khiển ở mặt trước màn hình để chỉnh hình ảnh đang hiển thị. 1 1 2 3 4 2 3 4 5 Các nút điều khiển Bảng sau đây mô tả các nút ở mặt trước: Nút mặt trước 1 Shortcut key (Phím tắt)/ Preset Modes (Phím tắt/Chế độ cài sẵn) 2 Mô tả Dùng nút này để chọn từ danh sách chế độ cài sẵn. Dùng nút này để truy cập trực tiếp menu Độ sáng/ Độ tương phản.
4 Exit (Thoát) Dùng nút này để trở về menu chính hoặc thoát menu chính OSD. Dùng nút Power (Nguồn) để On (Bật) và Off (Tắt) màn hình. 5 Nút bật/tắt nguồn (kèm theo Đèn trắng một màu cho biết màn hình đang Bật và đèn báo LED) hoạt động đầy đủ. Đèn trắng nhấp nháy cho biết chế độ tiết kiệm điện. Các nút điều khiển menu OSD Dùng các nút ở mặt trước màn hình để chỉnh cài đặt hình ảnh. 1 2 3 4 Nút mặt trước 1 Mô tả Dùng nút Lên để tăng các giá trị hoặc chuyển lên.
Sử dụng menu Hiển thị trên màn hình (OSD) Truy cập menu OSD LƯU Ý: Nếu bạn thay đổi các cài đặt và sau đó tiếp tục chuyển sang một menu khác hoặc thoát menu OSD, màn hình sẽ tự động lưu lại các thay đổi này. Các thay đổi cũng được lưu lại nếu bạn thay đổi các cài đặt và sau đó đợi menu OSD biến mất. 1. Nhấn nút để hiển thị menu chính OSD.
Biểu tượng Menu và Menu Mô tả phụ Brightness (Độ Dùng menu này để kích hoạt điều chỉnh Brightness (Độ sáng)/Contrast sáng)/Contrast (Độ tương phản). (Độ tương Dell S2X18M Energy Use phản) Brightness / Contrast Auto Adjust Input Source Color Display Energy 75% 75% Menu Personalize Others Resolution: 1920x1080, 60Hz Brightness (Độ sáng) Contrast (Độ tương phản) Độ sáng cho phép chỉnh độ sáng của đèn nền. Nhấn nút để tăng độ sáng và nhấn nút sáng (tối thiểu 0/tối đa 100).
Auto Adjust (Chỉnh tự động) Dùng nút này để kích hoạt cài đặt tự động và chỉnh menu. Dell S2X18M Energy Use Brightness / Contrast Press to adjust the screen automatically. Auto Adjust Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Hộp thoại sau hiển thị trên màn hình đen khi màn hình tự chỉnh sang đầu vào hiện hành: Auto Adjustment in Progress... Chức năng Chỉnh tự động cho phép màn hình tự chỉnh sang tín hiệu video đầu vào.
Input Source (Nguồn vào) Dùng menu Input Source (Nguồn vào) để chọn giữa các tín hiệu video khác nhau có thể được kết nối với màn hình của bạn. Dell S2X18M Energy Use Brightness / Contrast VGA Auto Adjust DVI Input Source Auto Select Color Reset Input Source On Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz VGA Chọn đầu vào VGA khi bạn đang sử dụng đầu cắm (VGA) analog. Nhấn để chọn nguồn vào VGA. DVI Chọn đầu vào DVI khi sử dụng đầu nối Kỹ thuật số (DVI).
Preset Modes (Chế độ cài sẵn) Khi chọn preset modes (chế độ cài sẵn), bạn có thể chọn Standard (Chuẩn), ComfortView (Xem thoải mái), Multimedia (Đa phương tiện), Movie (Phim), Game (Trò chơi), Warm (Nóng), Cool (Nguội) hoặc Custom Color (Màu tùy chỉnh) từ danh sách. ∞∞ Standard (Chuẩn): Nạp các cài đặt màu mặc định của màn hình. Đây là chế độ cài sẵn mặc định. ∞∞ ComfortView (Xem thoải mái): Giảm mức ánh sáng xanh phát ra từ màn hình để giúp mắt của bạn xem thoải mái hơn.
Input Color Format (Định dạng màu sắc đầu vào) Cho phép bạn cài chế độ đầu vào video sang: ∞∞ RGB: Chọn tùy chọn này nếu màn hình của bạn được kết nối với máy tính hoặc đầu phát DVD qua adapter kết nối HDMI với DVI. ∞∞ YPbPr: Chọn tùy chọn này nếu đầu đĩa DVD của bạn chỉ hỗ trợ đầu ra YPbPr.
Display (Hiển thị) Sử dụng Display (Hiển thị) để chỉnh hình.
Energy (Năng lượng) Dell S2X18M Energy Use Brightness / Contrast Power Button LED Auto Adjust Reset Energy On During Active Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Power Button LED (Đèn LED nút nguồn) Reset Energy (Cài lại năng lượng) Menu Cho phép bạn cài đèn báo LED nguồn sang On During Active (Bật trong khi hoạt động) hoặc Off During Active (Tắt trong khi hoạt động) để tiết kiệm điện.
Lock (Khóa) Kiểm soát người dùng truy cập vào các điều chỉnh. Khi đã chọn Khóa, bạn không được phép thực hiện các điều chỉnh người dùng. Tất cả các nút đều bị khóa. LƯU Ý: ∞∞ Lock (Khóa) – Khóa mềm (qua menu OSD) hoặc khóa cứng (nhấn và giữ nút bên trong nút nguồn trong 6 giây) Reset Menu (Cài lại menu) Personalize (Cá nhân hóa) ∞∞ Unlock (Mở khóa) – Chỉ mở khóa cứng (nhấn và giữ nút bên trong nút nguồn trong 6 giây) Thiết lập lại mọi cài đặt OSD về giá trị mặc định gốc.
Others (Khác) Dell S2X18M Energy Use Brightness / Contrast DDC/CI Enable Auto Adjust LCD Conditioning Disable Input Source Reset Other Color Factory Reset Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Sử dụng màn hình | 27
DDC/CI DDC/CI (Kênh dữ liệu hiển thị/giao diện lệnh) cho phép điều chỉnh các thông số kỹ thuật của màn hình (độ sáng, cân bằng màu sắc, v.v...) qua phần mềm trên máy tính. Bạn có thể tắt tính năng này bằng cách chọn Tắt. Bật tính năng này để có trải nghiệm người dùng tốt nhất và mang lại hiệu suất tối ưu cho màn hình của bạn.
Thông tin cảnh báo OSD Khi đã bật tính năng Dynamic Contrast (Độ tương phản động) (trong các chế độ cài sẵn sau: Game (Trò chơi) hoặc Movie (Phim)), tùy chọn chỉnh độ sáng thủ công sẽ bị tắt. Dell S2X18M To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? No Yes Khi màn hình không hỗ trợ chế độ phân giải đặc biệt, thông báo sau đây sẽ hiển thị: Dell S2X18M The current input timing is not supported by the monitor display.
Khi màn hình vào Chế độ tiết kiệm điện , thông báo sau sẽ hiển thị: Dell S2X18M Entering Power Save Mode. Nếu bạn nhấn bất kỳ nút nào ngoại trừ nút nguồn, các thông báo sau đây sẽ hiển thị tùy vào lựa chọn đầu vào: Dell S2X18M There is no signal coming from your computer. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button now to select the correct input source on the On-Screen-Display menu.
Cài đặt độ phân giải tối đa Để cài độ phân giải tối đa cho màn hình: Trên Windows 7, Windows 8, Windows 8.1 và Windows 10: 1. Đối với Windows 8 hoặc Windows 8.1, chọn biểu tượng Desktop (Màn hình nền) để chuyển sang màn hình nền cổ điển. 2. Nhấp phải vào màn hình nền và nhấp Độ phân giải màn hình. 3. Nhấp danh sách Độ phân giải sổ xuống và chọn 1920 x 1080. 4. Nhấp OK. Nếu không nhìn thấy 1920 x 1080 như một tùy chọn thì bạn có thể cần cập nhật driver đồ họa.
Sử dụng chức năng Nghiêng LƯU Ý: Tùy chọn này chỉ áp dụng cho màn hình có giá đỡ. Khi mua bất kỳ loại giá đỡ nào khác, hãy tham khảo hướng dẫn lắp đặt giá đỡ tương ứng để biết cách lắp đặt. Xoay màn hình Trước khi bạn xoay màn hình, màn hình phải được kéo dài hoàn toàn theo hướng thẳng và đặt nghiêng lên hoàn toàn để tránh chạm mép dưới màn hình. LƯU Ý: Giá đỡ được tháo ra khi vận chuyển màn hình từ nhà máy.
Khắc phục sự cố CẢNH BÁO: Trước khi bắt đầu bất cứ quy trình nào ở phần này, hãy tuân thủ Hướng dẫn an toàn. Tự kiểm tra Màn hình cung cấp tính năng tự kiểm tra cho phép bạn kiểm tra xem màn hình có đang hoạt động thích hợp hay không. Nếu màn hình và máy tính của bạn được kết nối đúng cách nhưng màn hình vẫn tối, hãy chạy tùy chọn tự kiểm tra màn hình bằng cách thực hiện theo các bước sau: 1. Tắt máy tính lẫn màn hình. 2. Rút cáp video khỏi mặt sau máy tính.
Chẩn đoán tích hợp Màn hình của bạn tích hợp hệ chẩn đoán giúp bạn xác định xem mọi bất thường màn hình gặp phải có phải là sự cố thường gặp của màn hình, hoặc máy tính và card video hay không. LƯU Ý: Bạn chỉ có thể chạy công cụ chẩn đoán tích hợp khi đã rút cáp video và màn hình đang ở chế độ tự kiểm tra. 1 2 3 4 5 Để chạy chế độ chẩn đoán tích hợp: 1. Đảm bảo màn hình sạch sẽ (không có các hạt bụi trên bề mặt màn hình). 2. Rút (các) cáp video khỏi mặt sau máy tính hoặc màn hình.
Các sự cố thường gặp Bảng sau đây cung cấp thông tin chung về các sự cố màn hình thường gặp mà bạn có thể gặp phải và các giải pháp khả thi: Triệu chứng thường gặp Sự cố gặp phải Giải pháp khả thi Không có đèn LED video/Đèn LED nguồn tắt Không có hình ∞∞ Đảm bảo cáp video đang kết nối với màn hình, và máy tính được kết nối đúng cách và an toàn. ∞∞ Kiểm tra xem ổ cắm điện có đang hoạt động đúng cách với bất kỳ thiết bị điện nào khác hay không.
Méo hình Màn hình không canh giữa thích hợp ∞∞ Cài màn hình về Cài đặt mặc định gốc (Factory Reset (Cài lại về giá trị gốc)). ∞∞ Chỉnh các nút điều khiển ngang & dọc qua menu OSD. Đường ngang/ dọc Màn hình có một hoặc nhiều đường kẻ ∞∞ Cài màn hình về Cài đặt mặc định gốc (Factory Reset (Cài lại về giá trị gốc)). ∞∞ Thực hiện kiểm tra bằng tính năng tự kiểm tra màn hình và xác định xem các đường này có ở chế độ tự kiểm tra hay không.
Lỗi giữ ảnh từ ảnh tĩnh vẫn còn lưu giữ trên màn hình trong một thời gian dài Bóng mờ từ ảnh ∞∞ Sử dụng tính năng Power Management (Quản lý nguồn) tĩnh hiển thị sẽ để tắt màn hình vào bất cứ lúc nào không sử dụng (để xuất hiện trên biết thêm thông tin, xem Chế độ quản lý nguồn). màn hình ∞∞ Ngoài ra, cũng có thể sử dụng chức năng bảo vệ màn hình thay đổi tự động. Bóng mờ hoặc phủ quá rộng video Hình di động hình như có vệt bóng mờ hoặc cạnh sáng.
Phụ lục CẢNH BÁO: Hướng dẫn an toàn CẢNH BÁO: Sử dụng các nút điều khiển, điều chỉnh hoặc các quy trình khác ngoài các quy trình được nêu rõ trong tài liệu này có thể khiến người dùng dễ bị điện giật, gặp các rủi ro về điện và/hoặc cơ học. CẢNH BÁO: Đối với màn hình có mặt vát bóng láng, người dùng nên cân nhắc đến việc lắp đặt màn hình vì mặt vát có thể gây ra phản ứng nhiễu loạn từ các bề mặt sáng và ánh sáng xung quanh. Để biết thông tin về hướng dẫn an toàn, xem Hướng dẫn thông tin sản phẩm.
Cài Đặt Màn Hình Cài đặt độ phân giải màn hình Để đạt được hiệu suất hiển thị tối đa với hệ điều hành Microsoft Windows, hãy đặt độ phân giải màn hình ở mức 1920 x 1080 pixel bằng cách thực hiện các bước sau: Trên Windows 7, Windows 8, Windows 8.1 và Windows 10: 1. Đối với Windows 8 hoặc Windows 8.1, chọn biểu tượng Desktop (Màn hình nền) để chuyển sang màn hình nền cổ điển. 2. Nhấp phải vào màn hình nền và nhấp Độ phân giải màn hình. 3. Nhấp danh sách Độ phân giải sổ xuống và chọn 1920 x 1080. 4. Nhấp OK.
7. Sau khi cài đặt các driver cho card đồ họa, thử cài lại độ phân giải sang mức1920 x 1080. LƯU Ý: Nếu bạn không thể cài độ phân giải đề nghị, hãy liên hệ với nhà sản xuất máy tính hoặc cân nhắc mua loại card đồ họa có hỗ trợ độ phân giải video.
Thông số kỹ thuật màn hình Thông số kỹ thuật màn hình phẳng Mẫu S2218M S2318M Loại màn hình Màn hình LCD TFT ma trận hoạt động Màn hình LCD TFT ma trận hoạt động Loại tấm nền Chuyển đổi trên mặt phẳng Chuyển đổi trên mặt phẳng Nghiêng 54,61 mm (21,5 in) 58,42 mm (23 in) Vùng hoạt động ngang 476,06 mm (18,74 in) 509,18 mm (20,05 in) Vùng hoạt động dọc 267,78 mm (10,54 in) Vùng 1274,79 cm (197,59 trong ) 1458,35 cm2 (226,04 trong2) Khoảng cách giữa các điểm ảnh
Chế độ hiển thị cài sẵn Chế độ hiển thị Tần số quét ngang (kHz) Tần số quét dọc (Hz) Đồng hồ điểm ảnh (MHz) Cực đồng bộ (Ngang/Dọc) VESA, 720 x 400 31,5 70,1 28,3 -/+ VESA, 640 x 480 31,5 60,0 25,2 -/- VESA, 640 x 480 37,5 75,0 31,5 -/- VESA, 800 x 600 37,9 60,3 40,0 +/+ VESA, 800 x 600 46,9 75,0 49,5 +/+ VESA, 1024 x 768 48,4 60,0 65,0 -/- VESA, 1024 x 768 60,0 75,0 78,8 +/+ VESA, 1152 x 864 67,5 75,0 108,0 +/+ VESA, 1280 x 1024 64,0 60,0 108,0 +/+ VE
Đặc tính vật lý Mẫu Loại cáp tín hiệu S2218M S2318M ∞∞ Kỹ thuật số:cáp rời DVI với các chấu chắc chắn. ∞∞ Kỹ thuật số:cáp rời DVI với các chấu chắc chắn.
Đặc tính môi trường Mẫu S2218M S2318M 0°C - 40°C (32°F - 104°F) 0°C - 40°C (32°F - 104°F) Nhiệt độ Sử dụng Không sử dụng Bảo quản ∞∞ -20°C - 60°C (-4°F - 140°F) ∞∞ -20°C - 60°C (-4°F - 140°F) Vận chuyển ∞∞ -20°C - 60°C (-4°F - 140°F) ∞∞ -20°C - 60°C (-4°F - 140°F) Độ ẩm Sử dụng Không sử dụng 10% đến 80% (không ngưng tụ) 10% đến 80% (không ngưng tụ) ∞∞ Bảo quản: 5% đến 90% (không ngưng tụ) ∞∞ Bảo quản: 5% đến 90% (không ngưng tụ) ∞∞ Vận chuyển: 5% đến 90% (không ngưng tụ) ∞∞ Vận chuyển:
Chế độ quản lý nguồn Nếu bạn đã cài đặt card màn hình hay phần mềm tuân thủ chuẩn DPM™ VESA vào máy tính, màn hình sẽ tự động giảm mức tiêu thụ điện khi không sử dụng. Chức năng này gọi là Power Save Mode (Chế Độ Tiết Kiệm Điện)*. Nếu máy tính phát hiện đầu vào từ bàn phím, chuột hoặc các thiết bị đầu vào khác, màn hình sẽ tự hoạt động trở lại. Bảng sau đây cho biết mức tiêu thụ điện và cách truyền tín hiệu của tính năng tiết kiệm điện tự động này.
ETEC: Tổng năng lượng tiêu thụ tính bằng KWh được xác định trong Energy Star phiên bản 7.0. Tài liệu này chỉ cung cấp thông tin và phản ánh hiệu suất hoạt động ở phòng thí nghiệm. Sản phẩm có thể hoạt động khác nhau, tùy thuộc vào phần mềm, các linh kiện và thiết bị ngoại vi mà quý khách đã đặt mua và chúng tôi không có trách nhiệm phải cập nhật thông tin này. Do đó, quý khách không nên dựa vào thông tin này để đưa ra các quyết định về độ dung sai điện hoặc bằng cách khác.
Cách gán chấu cắm Đầu cắm cáp VGA Số chấu cắm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Phía 15 chấu của cáp tín hiệu vừa kết nối Video-Đỏ Video-Lục Video-Lam Nối đất Tự kiểm tra Nối đất-Đỏ Nối đất-Lục Nối đất-Lam máy tính 5V/3.3V Nối đất-đồng bộ Nối đất Dữ liệu DDC Đ.bộ ngang Đ.
Đầu cắm DVI Số chấu cắm Phía 24 chấu của cáp tín hiệu vừa kết nối 1 2 3 4 5 Công tắc TMDS RX2Công tắc TMDS RX2+ Nối đất TMDS Không nối đất Không nối đất 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Đồng hồ DDC Dữ liệu DDC Không nối đất Công tắc TMDS RX1Công tắc TMDS RX1+ Nối đất TMDS Không nối đất Không nối đất Công suất +5 V/+3,3 V Tự kiểm tra Phát hiện cắm nóng Công tắc TMDS RX0Công tắc TMDS RX0+ Nối đất TMDS Không nối đất Không nối đất Nối đất TMDS Đồng