Ghidul utilizatorului Dell S2218M/S2318M Nr.
Note, precauţii şi avertizări NOTĂ: O NOTĂ indică informaţii importante care vă ajută să utilizaţi mai bine computerul. PRECAUŢIE: O PRECAUŢIE indică o eventuală deteriorare a echipamentului sau pierdere a datelor dacă nu sunt respectate instrucţiunile. AVERTIZARE: O AVERTIZARE indică o eventuală deteriorare a bunurilor, vătămare corporală sau un eventual deces. _________________________ Informaţiile din acest document pot fi modificate fără înştiinţare. © 2017 Dell Inc. Toate drepturile sunt rezervate.
Cuprins Despre monitor......................................................................... 5 Conţinutul pachetului................................................................................ 5 Caracteristicile produsului.........................................................................6 Identificarea componentelor şi a comenzilor.......................................8 Funcţia Plug and Play...............................................................................
Setarea rezoluţiei maxime...................................................................... 30 Utilizarea înclinării..................................................................................... 31 Depanarea................................................................................32 Testare automată......................................................................................32 Diagnosticări încorporate........................................................................
Despre monitor Conţinutul pachetului Monitorul este livrat cu componentele prezentate mai jos. Verificaţi dacă aţi primit toate componentele şi Contactați Dell nu lipseşte ceva. NOTĂ: Unele articole pot fi opţionale şi este posibil să nu fie livrate cu monitorul. Este posibil ca unele caracteristici sau suporturi media să nu fie disponibile în anumite ţări. NOTĂ: Pentru a-i monta un alt suport, consultaţi instrucţiunile din ghidul de montare al suportului respectiv.
∞∞ Cablu VGA (doar pentru modelul S2318NX) ∞∞ Suport cablu ∞∞ Ghid de configurare rapidă ∞∞ Informaţii privind siguranţa şi reglementările Caracteristicile produsului Monitorul cu ecran plat Dell S2218M_S2318M are o matrice activă, tranzistor cu peliculă subţire (TFT), afişaj cu cristale lichide (LCD), panou cu comutare în plan şi retroiluminare cu LED-uri. Caracteristicile monitorului includ: ∞∞ S2218M: afişaj cu suprafaţă de vizualizare de 54,61 cm (21.5 inchi) (măsurată pe diagonală).
∞∞ Putere 0,3 W în modul inactiv. ∞∞ Funcția Energy Gauge (Indicator energie) afișează nivelul de energie consumat de monitor în timp real. ∞∞ Optimizaţi confortul ochilor cu un ecran lipsit de scintilaţii şi cu caracteristica ComfortView care reduce la minimum emisia de lumină albastră.
Identificarea componentelor şi a comenzilor Vedere din faţă 1 2 Comenzi pe panoul frontal Etichetă Descriere 1 Butoane funcţionale (Pentru informaţii suplimentare, consultaţi Operarea monitorului) 2 Buton de pornire/oprire (cu indicator led) NOTĂ: Pentru afişajele cu ramă lucioasă, utilizatorul ar trebui să aleagă cu grijă aşezarea afişajului, deoarece rama poate avea reflexii deranjante din cauza luminii ambientale şi a suprafeţelor strălucitoare.
Vedere din spate S2218M S2218M 12V 12V S2218M S2218M S2218Mc 3.33A 12V S2218Mc 3.33A 12V 3.33A 3.33A S2218Mc S2218Mc 1 2 3 4 Vedere din spate fără suportul monitorului Etichetă Descriere 5 Vedere din spate cu suportul monitorului Utilizare 1 Fantă pentru dispozitivul de blocare 2 Etichetă de reglementare (inclusiv Prezintă aprobările legate de numărul de serie al codului de reglementare.
Vedere laterală Vedere de jos 1 2 3 Vedere de jos fără suportul monitorului Etichetă Descriere Utilizare 1 Port adaptor alimentare Pentru a conecta cablul de alimentare a monitorului utilizând adaptorul de c.c. de 12 V pentru tranziție. 2 Mufă DVI (HDCP) Pentru conectarea computerului la monitor utilizându-se un cablu DVI. 3 Mufă VGA Pentru a conecta computerul la monitor utilizând un cablu VGA.
Funcţia Plug and Play Puteţi instala monitorul în orice sistem compatibil cu Plug and Play. Monitorul îi furnizează automat sistemului computerului datele de identificare ale afişajului extins (EDID) utilizând protocoalele de tip canal de date ale afişajului (DDC) astfel încât sistemul să se poate configura singur şi să optimizeze setările monitorului. Majoritatea instalărilor de monitoare se face automat; selectaţi alte setări, dacă doriţi.
Configurarea monitorului Cuplarea suportului NOTĂ: Monitorul este livrat din fabrică fără a avea suportul montat. NOTĂ: Paşii următori sunt valabili pentru un monitor cu suport. 1 2 1 Pentru a fixa suportul monitorului: 1. Îmbinaţi dispozitivul de ridicare a suportului şi baza suportului şi apoi înşurubaţi baza suportului. 2. Potriviţi cele două lamele din partea de sus a suportului în canelura de pe partea din spate a monitorului. Apăsaţi pe suport până când se fixează în poziţie.
Conectarea monitorului AVERTIZARE: Înainte de a începe orice procedură din această secţiune, respectaţi instrucţiunile privind siguranţa. NOTĂ: Nu conectaţi toate cablurile simultan la computer. Pentru a conecta monitorul la computer: 1. Opriți computerul și deconectați cablul de alimentare. 2. Conectați cablul conectorului de afișare alb (DVI digital) sau albastru (VGA analog) la portul video corespunzător de pe spatele computerului. Nu utilizați simultan ambele cabluri la același computer.
Organizarea cablurilor După ce conectaţi toate cablurile necesare la monitor şi computer, organizaţi toate cablurile ca mai sus. NOTĂ: După conectarea cablurilor, acestea vor trebui deconectate din nou pentru le trece prin gaură.
Scoaterea suportului monitorului NOTĂ: Pentru a preveni zgârierea ecranului LCD la scoaterea suportului, asiguraţi-vă că monitorul este aşezat pe o suprafaţă moale şi curată. NOTĂ: Paşii următori sunt valabili pentru un monitor cu suport. 2 2 3 Pentru a demonta suportul: 1. Aşezaţi monitorul pe o lavetă moale sau pe o pernă. 2. Utilizați o șurubelniță lungă și subțire pentru a apăsa pe zăvorul de eliberare. 3. După eliberarea zăvorului, îndepărtați baza de pe monitor.
Operarea monitorului Porniţi monitorul Apăsaţi pe butonul pentru a porni monitorul. Utilizarea comenzilor de pe panoul frontal Utilizaţi butoanele de comandă de pe partea din faţă a monitorului pentru a regla imaginea afişată. 1 1 2 3 4 2 3 4 5 Butoane de control Tabelul următor descrie butoanele de pe panoul frontal: Buton pe panoul frontal 1 Descriere Utilizaţi acest buton pentru a alege dintr-o listă de moduri prestabilite.
4 Exit (Ieşire) Utilizaţi acest buton pentru a reveni la meniul principal sau pentru a ieşi din meniul principal OSD. Utilizaţi butonul de alimentare pentru a porni şi opri monitorul. 5 Buton de pornire/oprire (cu Ledul alb constant indică faptul că monitorul este indicator led) pornit și complet funcțional. Ledul alb intermitent indică modul de economisire a energiei. Comenzile OSD Utilizaţi butoanele de comandă de pe partea din faţă a monitorului pentru a regla setările imaginii.
Utilizarea meniului afișat pe ecran (OSD) Accesarea meniului OSD NOTĂ: Dacă modificați setările și treceți la un alt meniu sau ieșiți din meniul OSD, monitorul salvează în mod automat modificările respective. Modificările mai sunt salvate dacă modificați setările și apoi așteptați să dispară meniul OSD. 1. Apăsaţi pe butonul pentru a afişa meniul principal OSD.
Pictogramă Meniuri şi Descriere submeniuri Utilizați acest meniu pentru a activa reglajul Brightness/ Brightness/ Contrast (Luminozitate/Contrast). Contrast (Luminozitate/ Dell S2X18M Energy Use Contrast) Brightness / Contrast Auto Adjust Input Source Color Display Energy 75% 75% Menu Personalize Others Resolution: 1920x1080, 60Hz Luminozitatea reglează strălucirea retroiluminării. Brightness (Luminozitate) Apăsaţi pe butonul pentru a mări luminozitatea şi apăsaţi pe butonul pentru a o reduce (min.
Auto Adjust (Reglare automată) Utilizaţi această tastă pentru a activa configurarea automată şi regla meniul. Dell S2X18M Energy Use Brightness / Contrast Press to adjust the screen automatically. Auto Adjust Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Dialogul următor apare pe un ecran negru deoarece monitorul se reglează singur în funcţie de intrarea curentă: Auto Adjustment in Progress...
Input Source (Sursă de intrare) Utilizaţi meniul surselor de intrare pentru a selecta între diferite semnale video care se pot conecta la monitor. Dell S2X18M Energy Use Brightness / Contrast VGA Auto Adjust DVI Input Source Auto Select Color Reset Input Source On Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz VGA Selectaţi intrarea VGA dacă utilizaţi conectorul (VGA). Apăsaţi pe pentru a selecta sursa de intrare VGA.
Preset Modes (Moduri prestabilite) Atunci când selectaţi Preset Modes (Moduri presetate), puteţi alege opţiunile Standard, ComfortView (Vizualizare confortabilă), Multimedia (Multimedia), Movie (Film), Game (Joc), Warm (Cald), Cool (Rece) sau Custom Color (Culoare particularizată) din listă. ∞∞ Standard: Încarcă setările de culoare implicite ale monitorului. Acesta este modul prestabilit implicit.
Vă permite să setaţi modul de intrare video: Input Color Format (Intrare ∞∞ RGB: Selectaţi această opţiune dacă monitorul este format culoare) conectat la un computer sau player DVD prin cablul de la HDMI la adaptor DVI. ∞∞ YPbPr: Selectaţi această opţiune dacă playerul DVD acceptă numai ieşirea YPbPr.
Display (Afişaj) Utilizaţi opţiunea Afişaj pentru a regla imaginea. Dell S2X18M Energy Use Brightness / Contrast Aspect Ratio Wide 16:9 Auto Adjust Horizontal Position 50 Input Source Vertical Position 50 Color Sharpness 50 Display Pixel Clock 50 Phase 23 Energy Menu Personalize Others Dynamic Contrast Response Time Normal Reset Display Resolution: 1920x1080, 60Hz Aspect Ratio (Raport aspect) Reglează raportul imaginii la lat 16:9, 4:3 sau 5:4.
Energy (Energie) Dell S2X18M Energy Use Brightness / Contrast Power Button LED Auto Adjust Reset Energy On During Active Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Power Button LED (Led buton de alimentare) Vă permite să setaţi activaţi ledul de alimentare în starea activă sau să îl dezactivaţi în timpul trecerii de la starea activă la cea de economisire a energiei.
Lock (Blocare) Controlează accesul utilizatorului la reglaje. Dacă selectaţi Blocare, utilizatorul nu mai poate face reglaje. Toate butoanele sunt blocate.
DDC/CI DDC/CI (canalul datelor afişajului/interfaţa de comandă) vă permite să monitorizaţi parametrii (luminozitate, balanţă culori etc.) care se pot regla prin intermediul software-ului pe computer. Puteţi dezactiva această caracteristică selectând Disable (Dezactivare). Activaţi această caracteristică pentru funcţionarea şi utilizarea optimă a monitorului.
Mesaje de avertizare OSD Atunci când caracteristica Dynamic Contrast (Contrast dinamic) este activată (în aceste moduri prestabilite: Game (Joc) sau Movie (Film)), reglarea manuală a luminozităţii este dezactivată. Dell S2X18M To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? No Yes Dacă monitorul nu acceptă o anumită rezoluţie, se afişează mesajul următor: Dell S2X18M The current input timing is not supported by the monitor display.
Dacă monitorul trece la modul de economisire a energiei, apare mesajul următor: Dell S2X18M Entering Power Save Mode. Dacă apăsaţi pe orice buton, cu excepţia celui de alimentare, va apărea mesajul următor, în funcţie de intrarea selectată: Dell S2X18M There is no signal coming from your computer. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button now to select the correct input source on the On-Screen-Display menu.
Setarea rezoluţiei maxime Pentru a seta rezoluţia maximă a monitorului: În Windows 7, Windows 8, Windows 8.1 și Windows 10: 1. Pentru Windows 8 şi Windows 8.1, selectaţi panoul Desktop pentru a comuta desktopul clasic. 2. Faceţi clic dreapta pe desktop şi faceţi clic pe Rezoluţie ecran. 3. Faceţi clic în lista verticală cu rezoluţia ecranului şi selectaţi 1920 x 1080. 4. Faceţi clic pe OK. Dacă nu vedeți opțiunea 1920 x 1080, este posibil să fie necesară actualizarea driverului plăcii grafice.
Utilizarea înclinării NOTĂ: Valabil pentru un monitor cu suport. Dacă achiziţionaţi un alt suport, consultaţi instrucţiunile din ghidul de montare al suportului respectiv. Rotirea monitorului Înainte de a roti monitorul, acesta trebuie extins complet pe verticală și înclinat complet pentru a evita lovirea părții de dedesubt a monitorului. NOTĂ: Monitorul este livrat din fabrică fără a avea suportul montat.
Depanarea AVERTIZARE: Înainte de a începe orice procedură din această secţiune, respectaţi instrucţiunile privind siguranţa. Testare automată Monitorul vă oferă caracteristica de testare automată care vă permite să verificaţi dacă monitorul funcţionează corect. Dacă monitorul şi computerul sunt corectate în mod adecvat, dar ecranul monitorului rămâne întunecat, rulaţi testarea automată a monitorului parcurgând etapele următoare: 1. Opriţi computerul şi monitorul. 2.
Diagnosticări încorporate Monitorul are un instrument de diagnosticare încorporat care vă ajută să stabiliţi dacă o anomalie a ecranului este o problemă inerentă a monitorului sau a computerului şi plăcii video. NOTĂ: Puteţi rula diagnosticarea încorporată numai dacă este deconectat cablul video şi monitorul este în modul de testare automată. 1 2 3 4 5 Pentru a rula diagnosticarea încorporată: 1. Asiguraţi-vă că ecranul este curat (nu există particule de praf pe suprafaţa ecranului). 2.
Probleme obişnuite Tabelul următor conţine informaţii generale despre problemele frecvente ale monitorului pe care le puteţi întâlni şi soluţiile posibile: Simptome comune Ce observaţi Soluţii posibile Lipsă semnal Lipsă imagine video/indicator LED de alimentare stins ∞∞ Asiguraţi-vă că este conectat şi fixat corespunzător cablul video care face legătura între monitor şi computer. ∞∞ Verificaţi dacă priza de curent funcţionează corespunzător făcând proba cu orice alt echipament electric.
Linii orizontale/ verticale Pe ecran apar una sau mai multe linii ∞∞ Resetaţi monitor la Setări din fabrică (Factory Reset (Resetare la valorile din fabrică)). ∞∞ Efectuaţi testarea automată a monitorului şi stabiliţi dacă aceste linii se regăsesc şi în testul automat. ∞∞ Verificaţi să nu existe pini rupţi sau îndoiţi la conectorul cablului video. ∞∞ Rulaţi diagnosticarea încorporată.
Probleme specifice produsului Simptome specifice Ce observaţi Soluţii posibile Imaginea ecranului este prea mică Imaginea este ∞∞ Verificaţi setarea Aspect Ratio (Raport de aspect) în centrată pe ecran, setarea Display (Afişaj) din meniul OSD. dar nu umple ∞∞ Resetaţi monitor la Setări din fabrică (Factory Reset întreaga suprafaţă (Resetare la valorile din fabrică)).
Anexă AVERTIZARE: Instrucţiunile privind siguranţa AVERTIZARE: Utilizarea altor comenzi, reglaje sau proceduri decât cele specificate în această documentaţie poate duce la şocuri sau defecţiuni electrice şi/sau mecanice. AVERTIZARE: Pentru afişajele cu ramă lucioasă, utilizatorul ar trebui să aleagă cu grijă aşezarea afişajului, deoarece rama poate avea reflexii deranjante din cauza luminii ambientale şi a suprafeţelor strălucitoare.
Configurarea monitorului Setarea rezoluţiei afișajului Pentru performanța maximă a afișajului cu sistemele de operare Microsoft Windows, setați rezoluția de afișare la 1920 x 1080 pixeli parcurgând etapele următoare: În Windows 7, Windows 8, Windows 8.1 și Windows 10: 1. Pentru Windows 8 şi Windows 8.1, selectaţi panoul Desktop pentru a comuta desktopul clasic. 2. Faceţi clic dreapta pe desktop şi faceţi clic pe Rezoluţie ecran. 3.
7. După instalarea driverelor adaptorului grafic, încercați să setați rezoluția înapoi la 1920 x 1080. NOTĂ: Dacă nu puteți seta rezoluția recomandată, contactați producătorul computerului sau luați în calcul achiziționarea unui adaptor grafic care va accepta rezoluția video.
Specificațiile monitorului Specificaţiile panoului plat Model S2218M S2318M Tip de ecran Matrice activă - LCD TFT Matrice activă - LCD TFT Tip de panou Tehnologie In-Plane Switching Tehnologie In-Plane Switching Diagonală 54,61 cm (21,5 inchi) 58,42 cm (23 inchi) Orizontală, suprafaţă activă 476,06 mm (18,74 inchi) 509,18 mm (20,05 inchi) 267,78 mm (10,54 inchi) 286,42 mm (11,28 inchi) 1274,79 cm2 (197,59 inchi2) 1458,35 cm2 (226,04 inchi2) Distanţa între centrele pixelilor 0,248 mm 0,2
Moduri de afişare presetate Mod de afişare Frecvenţă orizontală (kHz) Frecvenţă Sincronizator verticală (Hz) pixeli (MHz) Polaritate sincronizare (orizontală/ verticală) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.
Caracteristici fizice Model S2218M S2318M Tip de cablu de semnal ∞∞ Digital:detaşabil, DVI, pini ∞∞ Digital:detaşabil, DVI, pini ficși. ficși. ∞∞ Analog:detaşabil, D-Sub, cu 15 pini. ∞∞ Analog:detaşabil, D-Sub, cu 15 pini.
Caracteristici de mediu Model S2218M S2318M În stare de funcţionare între 0°C şi 40°C (între 32°F şi 104°F) între 0°C şi 40°C (între 32°F şi 104°F) Oprit ∞∞ între -20°C şi 60°C (între -4°F şi 140°F) ∞∞ între -20°C şi 60°C (între -4°F şi 140°F) ∞∞ între -20°C şi 60°C (între -4°F şi 140°F) ∞∞ între -20°C şi 60°C (între -4°F şi 140°F) În stare de funcţionare între 10 şi 80% (fără condensare) între 10 şi 80% (fără condensare) Oprit ∞∞ Depozitare: între 5 şi 90% (fără condensare) ∞∞ Depozitare: î
Moduri de gestionare a alimentării Dacă aveţi placa video compatibilă cu DPM™ de la VESA sau software-ul instalat pe PC, monitorul îşi poate reduce automat consumul de energie atunci când nu este utilizat. Acesta este modul de economisire a energiei*. În cazul în care computerul detectează semnal de intrare de la tastatură, mouse sau alt dispozitiv, monitorul îşi reia automat funcţionarea. Tabelul următor prezintă consumul de energie şi semnalarea acestei caracteristici de economisire automată a energiei.
NOTĂ: PON: Consum de energie în modul pornit conform definiţiei din standardul Energy Star versiunea 7.0. ETEC: Consum total de energie în KWh conform definiţiei din standardul Energy Star versiunea 7.0. Acest document are doar scop informativ şi reflectă randamentul în condiţii de laborator. Este posibil ca produsul să se comporte diferit, în funcţie de softwareul, componentele şi perifericele pe care le-aţi comandat şi nu există obligaţia de a actualiza aceste informaţii.
Atribuire pini Conector VGA Număr de pini 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 pini ai cablului de semnal conectat Video-Roşu Video-Verde Video-Albastru GND Test automat GND-R GND-V GND-A Computer 5 V/3,3 V Sincronizare GND GND Date DDC Sincronizare orizontală Sincronizare verticală Sincronizator DDC 46 | Specificațiile monitorului
Conector DVI Număr de pini 1 2 3 4 5 24 pini ai cablului de semnal conectat 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Frecvenţă de sincronizare DDC Date DDC Oscilant TMDS RX1TMDS RX1+ Masă TMDS Oscilant Oscilant alimentare +5 V/+3,3 V Testare automată Detectare cuplare rapidă TMDS RX0TMDS RX0+ Masă TMDS Oscilant Oscilant Masă TMDS Sincronizator TMDS+ Sincronizator TMDS- TMDS RX2TMDS RX2+ Masă TMDS Oscilant Oscilant Specificațiile monitorului | 47