Users Guide

48 | Używanie monitora
Po przejściu monitora do trybu Power Save Mode (Tryb oszczędzania energii) pojawi
się następujący komunikat:
S2319HS S2719HS
Dell 23 Monitor
Entering Power Save Mode.
S2319HS
Dell 27 Monitor
Entering Power Save Mode.
S2719HS
Uaktywnij komputer i wybudź monitor, aby uzyskać dostęp do OSD.
Po naciśnięciu dowolnego przycisku oprócz przycisku zasilania, w zależności od
wybranego wejścia, pojawi się następujący komunikat:
S2319HS S2719HS
No DP signal from your device.
Dell 23 Monitor
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
S2319HS
No DP signal from your device.
Dell 27 Monitor
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
S2719HS
Po wybraniu wejścia VGA lub DP lub HDMI i gdy nie jest podłączony odpowiedni kabel,
wyświetlone zostanie pokazane niżej pływające okno dialogowe.
S2319HS S2719HS
Dell 23 Monitor
The display will go into Power Save Mode in 4 minutes.
No VGA Cable
www.dell.com/support/S2319HS
S2319HS
lub
Dell 23 Monitor
The display will go into Power Save Mode in 4 minutes.
No DP Cable
www.dell.com/support/S2319HS
S2319HS
Dell 27 Monitor
The display will go into Power Save Mode in 4 minutes.
No VGA Cable
www.dell.com/support/S2719HS
S2719HS
lub
Dell 27 Monitor
The display will go into Power Save Mode in 4 minutes.
No DP Cable
www.dell.com/support/S2719HS
S2719HS