Users Guide

44 | 顯示器操作
顯示器進入省電模式時，會出現下列訊息：
S2319HS S2719HS
Dell 23 Monitor
Entering Power Save Mode.
S2319HS
Dell 27 Monitor
Entering Power Save Mode.
S2719HS
啟動電腦並喚醒顯示器，以進入 OSD。
若按下電源按鈕以外的任一按鈕，則會依據您所選擇的輸入來源，出現下列其中一種訊息：
S2319HS S2719HS
No DP signal from your device.
Dell 23 Monitor
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
S2319HS
No DP signal from your device.
Dell 27 Monitor
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
S2719HS
若選擇VGA 或DP 或HDMI 輸入，但未連接對應的連接線，將會出現如下所示的浮動對話方
塊。
S2319HS S2719HS
Dell 23 Monitor
The display will go into Power Save Mode in 4 minutes.
No VGA Cable
www.dell.com/support/S2319HS
S2319HS
或
Dell 23 Monitor
The display will go into Power Save Mode in 4 minutes.
No DP Cable
www.dell.com/support/S2319HS
S2319HS
Dell 27 Monitor
The display will go into Power Save Mode in 4 minutes.
No VGA Cable
www.dell.com/support/S2719HS
S2719HS
或
Dell 27 Monitor
The display will go into Power Save Mode in 4 minutes.
No DP Cable
www.dell.com/support/S2719HS
S2719HS