User Manual

Setting Up the Monitor | 23
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions .
NOTE: Route the cables through the cable-management slot before connecting
them.
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1 T
urn Off your computer and disconnect the power cable.
2 Connect the
DP or HDMI cable from your monitor to the computer.
Connecting the DisplayPort (DP to DP) cable
Connecting the HDMI cable (optional)
NOTE: The graphics are used for the purpose of illustration only. Appearance of the
computer may vary.