User Manual

Setting Up the Monitor | 27
Removing the Monitor Stand
CAUTION: To prevent scratches on the LCD screen while removing the
stand,make sure that the monitor is placed on a soft, clean surface.
NOTE: The procedure below is applicable for the default stand. If you
purchased any other stand, see the documentation shipped with the stand to
set it up.
To remove the stand:
1 Place the monitor on the cushion or thick sitting mat near the edge of table.
2 Tilt the stand downwards to access to the release latch.
3 Use a long and thin screwdriver to push the release latch.
4 While pushing the release latch, pull the stand in the arrow direction to remove
the stand.