Dell S2418HN Dell S2418NX Uživatelská příručka Model: S2418HN/S2418NX Regulatorní model: S2418Nt
POZNÁMKA: POZNÁMKA označuje důležité informace, které pomáhají lépe využít počítač. POZOR: Slovo POZOR upozorňuje na možné poškození hardwaru nebo ztrátu dat v případě nedodržení pokynů. VAROVÁNÍ: Slovo VAROVÁNÍ varuje před možným poškozením majetku, zraněním nebo smrtí. Copyright © 2017 Dell Inc. Všechna práva vyhrazena. Tento výrobek je chráněn zákony na ochranu autorských práv a duševního vlastnictví Spojených států a mezinárodními zákony na ochranu autorských práv a duševního vlastnictví.
Obsah O tomto monitoru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Obsah balení . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Vlastnosti produktu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Součásti a ovládací prvky . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Ttechnické údaje monitoru . . . . . . . . . . . .
Příloha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Bezpečnostní pokyny . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Sdělení komise FCC (pouze USA) a informace o dalších předpisech . . 43 Kontaktování společnosti Dell . . . . . . . . . . . . . . . . . . . . . . . . 43 Sestavení monitoru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O tomto monitoru Obsah balení Tento monitor je dodáván s níže uvedenými součástmi. Zkontrolujte, zda jste obdrželi všechny součásti a pokud některá chybí, kontaktujte společnost Dell. POZNÁMKA:Některé položky mohou být volitelné a nemusí být v monitorem dodány. Některé funkce nebo média nemusejí být v některých zemích k dispozici.
Kabel VGA (Pouze S2418NX) Kabel HDMI • Médium s ovladači a dokumentací • Návod pro rychlou instalaci • Bezpečnostní a právní informace Vlastnosti produktu Monitor Dell S2418HN/S2418NX je vybaven displejem z tekutých krystalů (LCD) s aktivní matricí, technologií THF (Thin-Film Transistor) a podsvícením LED. Mezi vlastnosti tohoto monitoru patří: • Viditelná plocha (úhlopříčka) 60,47 cm (23,8 palců). Rozlišení 1920 x 1080 s podporou zobrazení na celou obrazovku pro nižší rozlišení.
Součásti a ovládací prvky Pohled zepředu Štítek 1 2 Popis Tlačítka funkcí (další informace viz část Ovládání monitoru) Vypínač (s indikátorem LED) Pohled zezadu Štítek Popis 1 Otvor zámku pro zabezpečení 2 3 4 Použití Zajištění monitoru lankovým zámkem (nutno zakoupit samostatně). Čárový kód, výrobní číslo a servisní Viz v případě kontaktu technické podpory štítek společnosti Dell. Vykreslování písmen Obsahuje přehled schválení podle úředních vyhlášek.
Pohled zdola Štítek Popis 1 Konektor střídavého napájení 2 Port HDMI 3 Port VGA 4 Port linkového výstupu zvuku Použití Připojte napájecí adaptér. Připojte počítač pomocí kabelu HDMI. Připojte počítač pomocí kabelu VGA (volitelně). Připojte reproduktory pro přehrávání zvuku ze zvukových kanálů HDMI. Podporuje pouze 2kanálový zvuk. POZNÁMKA: Port linkového výstupu zvuku nepodporuje sluchátka. VAROVÁNÍ: Nadměrný akustický tlak ze sluchátek do uší nebo na uši může způsobit poškození nebo ztrátu sluchu.
Ttechnické údaje monitoru Technické údaje plochého panelu Typ obrazovky Typ panelu Viditelný obraz Úhlopříčka Aktivní plocha Horizontální Vertikální Plocha Rozteč pixelů Zorný úhel Horizontální Vertikální Výstupní jas Míra kontrastu Ochranná vrstva stínítka Podsvícení Doba odezvy Barevná hloubka Barevná škála Aktivní matice – TFT LCD IPS 60,47 cm (23,80 palců) 527,04 mm (20,75 palců) 296,46 mm (11,67 palců) 156246,28 mm2 (242,18 palců2) 0,2745 mm x 0,2745 mm 178 stupňů (typicky) 178 stupňů (typicky) 250 cd
Předvolené režimy zobrazení Režim zobrazení Horizontální frekvence (kHz) Vertikální frekvence (Hz) Takt pixelů (MHz) 720 x 400 31,5 70,0 28,3 Polarita synch.
Fyzické vlastnosti Typ konektoru • HDMI konektor • VGA konektor • Linkový výstup zvuku Typ signálního kabelu Kabel VGA o délce 1,5 m. Kabel HDMI2,0 o délce 1,8 m.
Vlastnosti prostředí Teplota Provozní Mimo provoz Vlhkost: Provozní Mimo provoz Nadmořská výška Provozní Mimo provoz Tepelný rozptyl 12 | O tomto monitoru 0°C až 40°C (32°F až 104°F) -20°C až 60°C (-4°F až 140°F) 10% až 80% (bez kondenzace) 5% až 90% (bez kondenzace) Max. 5 000 m (16 404 stop) max. 12 192 m (40 000 stop) 95,6 BTU/hod. (maximum) 68,3 BTU/hod.
Režimy řízení spotřeby Pokud je v daném počítači nainstalován software nebo videokarta vyhovující normě DPM organizace VESA, monitor dokáže automaticky snížit svou spotřebu energie, není-li používán. Tento stav se nazývá režim úspory energie*. Pokud počítač rozpozná vstup z klávesnice, myši nebo jiných vstupních zařízení, monitor automaticky obnoví provoz. Následující tabulka uvádí spotřebu energie a signalizaci této funkce pro automatickou úsporu energie: Režimy VESA Horizontální synch.
Uspořádání konektorů Konektor VGA Číslo kolíku 15 kolíková strana připojeného signálního kabelu 1 Video-červená 2 Video-zelená 3 Video-modrá 4 GND (zem.) 5 Automatický test 6 GND-R (č.) 7 GND-G (z.) 8 GND-B (m.) 9 Počítač 5 V/3,3 V 10 GND-synch 11 GND (zem.) 12 Data DDC 13 H-synch. 14 V-synch.
Konektor HDMI Číslo kolíku 19 kolíková strana připojeného signálního kabelu 1 TMDS DATA 2+ 2 TMDS DATA 2 STÍNĚNÍ 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 STÍNĚNÍ 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 STÍNĚNÍ 9 TMDS DATA 0- 10 TMDS TAKT+ 11 TMDS TAKT STÍNĚNÍ 12 TMDS TAKT- 13 CEC 14 Vyhrazeno (N.C.
Plug-and-Play Tento monitor lze nainstalovat do jakéhokoli počítače, který je kompatibilní s technologií Plug-and-Play. Monitor počítači automaticky poskytne své údaje EDID (Extended Display Identification Data) pomocí protokolů DDC (Display Data Channel): počítač se může sám zkonfigurovat a optimalizovat nastavení monitoru. Většina instalací monitoru je automatická; podle potřeby můžete vybrat jiná nastavení. Další pokyny pro změnu nastavení monitoru viz Ovládání monitoru.
Instalace monitoru Montáž stojánku POZNÁMKA: Zvedák a podstavec stojánku jsou z výroby dodávány oddělené od monitoru. POZNÁMKA: Následující postup platí pro výchozí stojánek. Pokud jste zakoupili jiný stojánek, vyhledejte pokyny pro instalaci v dokumentaci dodané se stojánkem. POZOR: Položte monitor na rovný, čistý a měkký povrch, aby se zabránilo poškrábání zobrazovacího panelu. Upevnění stojanu monitoru: 1 Sejměte ochranný kryt monitoru a položte monitor přední stranou dolů.
Připojení kabelu VGA (volitelně) Připojení kabelu HDMI Instalace držáku kabelů 18 | Instalace monitoru
Uspořádání kabelů Po připojení všech nezbytných kabelů k monitoru a k počítači (pokyny pro připojení kabelů viz část Připojení monitoru) uspořádejte všechny kabely podle obrázku výše.
Demontáž stojánku monitoru POZOR: Aby při demontáži stojanu nedošlo k poškrábání LCD zobrazovače, položte monitor na čistý a měkký povrch. POZNÁMKA: Následující postup platí pro výchozí stojánek. Pokud jste zakoupili jiný stojánek, vyhledejte pokyny pro instalaci v dokumentaci dodané se stojánkem. Demontáž stojanu: 1 Položte monitor na polštář nebo na silný kobereček k okraji stolu. 2 Nakloňte stojánek dolů, abyste získali přístup k uvolňovací západce.
Používání monitoru Zapnutí monitoru Stisknutím tlačítka zapněte monitor. Používání ovládacích prvků na předním panelu Pomocí ovládacích tlačítek na přední straně monitoru můžete upravit nastavení charakteristik zobrazeného obrazu. V případě použití těchto tlačítek k úpravám nastavení zajišťuje funkce OSD (on-screen display) aktuální zobrazení jejich číselných hodnot.
Následující tabulka obsahuje popis tlačítek na předním panelu: Tlačítko‑na předním panelu Popis 1 Tohoto tlačítko slouží k výběru se seznamu režimů předvoleb barev. Rychlé tlačítko: Přednastavené režimy 2 Toto tlačítko můžete použít k přímému přístupu do ovládacího menu „Jas / Kontrast“. Rychlé tlačítko: Jas / Kontrast 3 Toto tlačítko slouží ke spuštění nabídky OSD (OnScreen Display) a k výběru voleb v nabídce OSD. Viz Přístup k menu systému.
Tlačítko‑na předním panelu Pomocí tlačítek na přední straně monitoru můžete upravit nastavení obrazu. Tlačítko‑na předním panelu 1 Popis Tlačítka Nahoru (zvýšení) a Dolů (snížení) slouží k nastavování položek v nabídce OSD. Nahoru Dolů 2 Stisknutím tlačítka OK potvrdíte výběr. OK 3 Stisknutím tlačítka Back (Zpět) se vrátíte na předchozí nabídku.
Používání nabídky na obrazovce (OSD) Přístup k systémové nabídce POZNÁMKA: Veškeré změny provedené v nabídce OSD se automaticky uloží, když přejdete do jiné nabídky OSD, když ukončíte nabídku OSD nebo když počkáte, než nabídka OSD zmizí. 1 Stisknutím tlačítka spustíte nabídku OSD a zobrazíte hlavní nabídku. 2 Stisknutím tlačítek a můžete přecházet mezi volbami. Zároveň s přechodem z jedné ikony na druhou dojde ke zvýraznění názvu dané volby. 3 Jedním stisknutím tlačítka nebo nebo aktivujte označenou volbu.
Ikona Nabídka a podnabídky Popis Jas / Kontrast Tuto nabídku použijte k aktivaci pro úpravu jasu nebo kontrastu. Jas Kontrast Volba Jas slouží k nastavení luminance podsvícení (minimum 0; maximum 100). Stisknutím tlačítka zvýšíte jas. Stisknutím tlačítka snížíte jas. POZNÁMKA: Když je zapnutý dynamický kontrast, je ruční nastavení jasu deaktivováno. Nejdříve upravte Jas a pak Kontrast – pouze v případě nutnosti další úpravy.
Ikona Nabídka a podnabídky Popis Automatické Nastavení I když počítač rozpozná monitor při svém spuštění, funkce Auto Adjustment [automatické nastavení] umí optimalizovat nastavení displeje pro použití v konkrétní instalaci. Funkce Automatické Nastavení umožňuje monitoru provést vlastní nastavení pro příchozí videosignál. Po použití funkce Automatické Nastavení lze monitor doladit pomocí ovládací prvků Takt Pixelů (Hrubé) a Fáze (Jemné) v části Nastavení zobrazení.
Ikona Nabídka a podnabídky Popis Zdroj vstupu Nabídka Vstupní zdroj slouží k výběru různých vstupů videa, které lze připojit k monitoru. VGA HDMI Když používáte analogový (VGA) konektor, vyberte vstup VGA. vyberte vstupní zdroj VGA. Stisknutím Když jsou počítač a monitor propojeny kabelem HDMI, vyberte volbu HDMI a stiskněte tlačítko. vyberte vstupní zdroj HDMI. Stisknutím Automatický vyberte volbu Auto Select (Automatický výběr) a Pomocí Výběr monitor vyhledá dostupné zdroje vstupu.
Ikona Nabídka a podnabídky Popis Nastavení Barev Pomocí nabídky Barva upravte režim nastavení barvy. Režimy předvoleb Po výběru možnosti Preset Modes (Režimy předvoleb) můžete v seznamu vybrat možnosti Standard (Standardní), ComfortView, Multimedia (Multimédia), Movie (Film), Movie HDR (Film HDR), Game (Hra), Game HDR (Hra HDR), Warm (Teplé), Cool (Studené) nebo Custom Color (Vlastní barva). • Standardní: Výchozí nastavení barev. Toto je výchozí režim předvolby.
Ikona Nabídka a podnabídky Vstupní Formát Barev Reset Color (Resetovat nastavení barvy) Popis • Game (Hra): Načte optimální nastavení barev pro většinu herních aplikací. • *#Game HDR (Hra HDR): Načte optimální nastavení barev pro hry s podporou HDR. • Warm (Teplé),: Zvyšuje teplotu barev. Obrazovka má teplejší vzhled s červenožlutým odstínem. • Cool (Studené): Snižuje teplotu barev. Obrazovka má studenější vzhled s modrým odstínem.
Ikona Nabídka a podnabídky Popis Nastavení zobrazení Nabídka Nastavení zobrazení slouží k nastavení obrazu. Poměr Stran Slouží k nastavení poměru stran obrazu na Wide 16:9 (Širokoúhlý 16:9), 4:3 nebo 5:4. Horizontální Stiskem nebo posuňte obraz vlevo nebo vpravo. Pozice Minimum je ‚0‘ (-). Maximum je ‚100‘ (+). Vertikální Stiskem nebo posuňte obraz nahoru nebo dolů. Pozice Minimum je ‚0‘ (-). Maximum je ‚100‘ (+).
Ikona Nabídka a podnabídky Doba odezvy Obnovit Nastavení Zobrazení Energie Indikátor LED napájení Obnovit nastavení napájení Popis Umožňuje nastavit volbu Doba odezvy na Normální nebo Krátká. Slouží k obnovení výchozích továrních nastavení monitoru. Umožňuje nastavit stav indikátoru napájení pro úsporu energie. Výběrem této volby budou obnovena výchozí Nastavení napájení.
Ikona Nabídka a podnabídky Popis Nastavení nabídky Touto volbou zpřístupníte nastavení nabídky OSD, jako je například jazyk, doba zobrazení atd. Jazyk Slouží k nastavení jednoho z osmi jazyků nabídky OSD. Angličtina, španělština, francouzština, němčina, brazilská portugalština, ruština, zjednodušená čínština nebo japonština. Průhlednost Po výběru této volby nastavíte průhlednost nabídky pomocí a (min. 0 / max. 100).
Ikona Nabídka a podnabídky Popis Přizpůsobit Vyberte některou z funkcí Preset Modes (Režimy předvoleb), Brightness/Contrast (Jas/kontrast), Audo Adjust (Automatické nastavení), Input Source (Vstupní zdroj) nebo Aspect Ratio (Poměr stran) a nastavte ji jako rychlé tlačítko. Obnovit Slouží k obnovení výchozích továrních nastavení rychlých Přizpůsobení tlačítek.
Ikona Nabídka a podnabídky Popis Ostatní DDC/CI Výběrem této volby lze upravovat nastavení OSD, jako například DDC/CI, stabilizace LCD atd. DDC/CI (Display Data Channel/Command Interface) umožňuje upravovat nastavení monitoru pomocí softwaru v počítači. Výběrem volby Deaktivovat vypnete tuto funkci. V zájmu nejlepšího uživatelského zážitku a optimálního výkonu monitoru ponechte tuto funkci povolenou.
Ikona Nabídka a podnabídky Popis Stabilizace LCD Pomáhá opravit drobné projevy vypalování obrazu. V závislosti na stupni vypálení se tato funkce může projevit až po delší době. Výběrem volby Aktivovat zahájíte proces. Obnovit další nastavení Obnovit Tovární Nastavení Slouží k obnovení výchozí továrních hodnot dalších nastavení, například DDC/CI. Slouží k obnovení výchozích továrních hodnot všech nastavení OSD.
Varovné zprávy OSD Když je aktivována funkce Dynamic Contrast (Dynamický kontrast) (v těchto režimech předvoleb: Game (Hra) nebo Movie (Film)), je ruční nastavení jasu deaktivováno. Když monitor nepodporuje konkrétní režim rozlišení, zobrazí se následující zpráva: TTo znamená, že se monitor nemůže sesynchronizovat se signálem, který přijímá z počítače. Rozsahy horizontálních a vertikálních frekvencí tohoto monitoru viz část Technické údaje monitoru. Doporučený režim je 1920 x 1080.
Chcete-li vstoupit do nabídky OSD, aktivujte počítač a probuďte monitor Po stisknutí některého tlačítka vyjma vypínače se v závislosti na vybraném vstupu zobrazí jedna z následujících varovných zpráv: Pokud je vybrán vstup VGA nebo HDMI a příslušný kabel není připojen, zobrazí se následující místní dialogové okno. nebo Další informace naleznete v části Odstraňování problémů.
Odstraňování problémů VAROVÁNÍ: Před prováděním postupů v této části si přečtěte Bezpečnostní pokyny. Automatický test Tento monitor obsahuje funkci autotest, která umožňuje zkontrolovat správnou funkci displeje. Pokud jsou monitor a počítač správně zapojeny ale jeho obrazovka zůstane tmavá, spusťte funkci autotest displeje provedením následujícího postupu: 1 Vypněte počítač a monitor. 2 Odpojte kabel monitoru ze zadní strany počítače.
Integrovaná diagnostika Tento monitor je vybaven integrovaným diagnostickým nástrojem, který pomáhá stanovit, zda zjištěnou abnormálnost obrazovky způsobuje problém monitoru nebo s počítače a grafické karty. POZNÁMKA: Integrovanou diagnostiku lze spustit pouze, když je odpojen kabel videa a když se monitor nachází v režimu automatického testu. Pokyny pro spuštění integrované diagnostiky: 1 Zkontrolujte, zda je obrazovka čistá (žádné částečky prachu na povrchu obrazovky).
Obecné problémy Následující tabulka obsahuje všeobecné informace o obecných problémech s monitorem a možná řešení: Obvyklé příznaky Bez videa / LED napájení nesvítí Zjištěné projevy Možná řešení Bez videa / LED napájení svítí Žádný obraz nebo žádný jas Chybějící pixely Obrazovka LCD obsahuje tečky Zaseklé pixely Obrazovka LCD obsahuje jasné tečky Potíže s jasem Obraz je příliš tmavý nebo světlý • Zkontrolujte, zda je kabel videa řádně a bezpečně připojen k monitoru a k počítači.
Obvyklé příznaky Zjištěné projevy Možná řešení Občasné potíže Monitor střídavě • Zkontrolujte, zda je kabel videa řádně a bezpečně připojen k monitoru a k počítači. funguje a naopak • Obnovte výchozí tovární nastavení monitoru. • Proveďte automatický test monitoru a ověřte, zda k občasnému problému dochází v tomto režimu. Obraz není • Proveďte automatický test monitoru. barevný • Zkontrolujte, zda je kabel videa řádně a bezpečně připojen k monitoru a k počítači.
Specifické příznaky Zjištěné projevy Možná řešení Žádný vstupní signál při stisknutí libovolného ovládacího prvku Žádný obraz, indikátor svítí bíle. Obraz nevyplňuje celou obrazovku. Obraz • V důsledku odlišného formátu videa (poměru nevyplňuje stran) u disků DVD nemusí obraz zabírat celou výšku nebo šířku plochu monitoru. obrazovky • Spusťte integrovanou diagnostiku. 42 | Odstraňování problémů • Zkontrolujte zdroj signálu.
Příloha Bezpečnostní pokyny V případě monitorů s lesklým rámečkem je třeba dobře zvážit umístění monitoru, protože se od rámečku může odrážet okolní světlo a lesklé povrchy a způsobovat rušení. VAROVÁNÍ: Používání ovládacích prvků, provádění změn nastavení nebo postupů jiným způsobem, než jak je určeno v této dokumentaci, může způsobit úrazy vysokým napětím, elektrickým proudem nebo mechanickými vlivy. Bezpečnostní pokyny viz Informace o bezpečnosti, prostředí a předpisech (SERI).
Sestavení monitoru POZNÁMKA: Když vyberete možnost movie HDR (Film HDR) nebo game HDR (Hra HDR) v části Color (Barva) funkcí nabídky OSD, může být podporováno maximální vstupní rozlišení na 3840 x 2160. Nastavení rozlišení obrazovky 1920 X 1080 Pro dosažení optimálního výsledku nastavte rozlišení zobrazení na 1920 x 1080 obrazových bodů podle následujících kroků: Ve Windows Vista, Windows 7, Windows 8 nebo Windows 8.1: 1 Pouze v případě operačního systému Windows 8 nebo Windows 8.
Počítač jiný než Dell Ve Windows Vista, Windows 7, Windows 8 nebo Windows 8.1: 1 Pouze v případě operačního systému Windows 8 nebo Windows 8.1 výběrem dlaždice Pracovní plocha přepněte na klasické zobrazení pracovní plochy. 2 Klepněte pravým tlačítkem na plochu a vyberte Přizpůsobení . 3 Klepněte na Změnit nastavení zobrazení. 4 Klepněte na Upřesnit Nastavení. 5 Určete dodavatele vaší grafické karty podle popisu v horní části okna (například NVIDIA, ATI, Intel atd.).
Pokyny pro údržbu Čištění monitoru VAROVÁNÍ: Před čistěním monitoru odpojte jeho napájecí kabel z elektrické zásuvky. POZOR: Před čištěním monitoru si přečtěte a dodržujte bezpečnostní pokyny. Při rozbalování, čištění nebo manipulaci s monitorem postupujte podle pokynů v následujícím seznamu: • • • • • Antistatickou obrazovku vyčistíte pomocí čisté měkké látky, zvlhčené mírným namočením ve vodě. Pokud možno používejte speciální jemnou tkaninu na čištění obrazovek a vhodný roztok pro antistatickou vrstvu.