Users Guide

28  │  Setting up the monitor
Setting up the monitor
Setting up the stand
NOTE: The stand is not factory-installed.
NOTE: The following steps are specifically for setting up the stand that
is shipped with your monitor.If you are attaching a stand that you
purchased from any other source, follow the setup instructions that
were included with the stand.
To set up the mo
nitor stand:
1. F
ollow the instructions on the flaps of packaging box to remove the stand
from the cushion that secures it.
2. R
emove the stand base and stand riser from the packaging cushion.
3. Align and place the stand riser on the stand base.
4. Open the
screw handle at the bottom of the stand base and turn it clockwise
to secure the stand assembly.
5. C
lose the screw handle.