Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the display
- Configuring the display settings on your computer after rotation
- Operating the monitor webcam
- Connecting your monitor
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (optional)
- Operating the monitor
- Troubleshooting
- Appendix
32 | Setting up the monitor
Configuring the display settings on your computer after
rotation
After rotating the display, complete the following procedure to configure the display
settings on your computer.
NOTE: If you are using the monitor with a non-Dell computer, go to the graphics
card manufacturer’s website or your computer manufacturer website for
information about rotating the contents of your display.
To configure the display settings:
1. Right-click the Desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have an AMD graphics card, select the Rotation tab and set the preferred
rotation.
4.If you have an nVidia graphics card, click the nVidia tab, in the left column select
NVRotate, and then select the preferred rotation.
5.If you have an Intel
graphics card, select the Intel graphics tab, click Graphic
Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to
https://www.dell.com/support and download the latest driver for your graphics
card.
Operating the monitor webcam
Follow these steps when you want to use the monitor webcam:
1. Peel o the camera label on monitor.
2. Push the top of the webcam to extend or retract the camera.
3. Peel o the protective lm on webcam.
4. Extend the camera before use and retract the camera to protect your privacy
when not in use.
1
2
3