Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the display
- Configuring the display settings on your computer after rotation
- Operating the monitor webcam
- Connecting your monitor
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (optional)
- Operating the monitor
- Troubleshooting
- Appendix
48 | Operating the monitor
Icon Menu and
submenus
Description
Sharpness Makes the image look sharper or softer.
Use
or to adjust the sharpness from ‘0’ to ‘100’.
Response
Time
Allows you to set the Response Time to Normal or Fast
or Extreme.
Reset Display Resets all settings under the Display menu to the factory
defaults.
Audio &
Webcam
Use the Audio & Webcam menu to adjust the settings.
Volume
Allows you to increase the speaker volume.
Press the
and buttons to adjust the volume from ‘0’
to ‘100’.
Speaker
Select Mute or Unmute the Speaker function.
Microphone
Select Mute or Unmute the Microphone function.
Webcam
Select Enable or Disable the Webcam function.
Status
Indicator
Select Off or Temporary to show the status of speaker,
microphone, and webcam.
Audio Profile
Select playback function.
Reset Audio &
Webcam
Resets all settings under the Audio & Webcam menu to
the factory defaults.
NOTE: With the USB cable audio volume sync with
windows volume and not to default settings.
NOTE: If the user connects the HDMI cable to play audio
and then plug in the USB-C cable, the audio channel moves
to echo canceling.
Monitor Volume also sync with computer.