Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the display
- Configuring the display settings on your computer after rotation
- Operating the monitor webcam
- Connecting your monitor
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (optional)
- Operating the monitor
- Troubleshooting
- Appendix
Operating the monitor | 55
If you want to disable it, select “Audio & Webcam->Status Indicator->Off” in the OSD
menu.
If you press any button other than the power button, the following messages appear
depending on the selected input.
A message is displayed while the cable supporting DP alternate mode is connected to
the monitor under the following conditions:
• When Auto select for USB-C is set to Prompt for Multiple Inputs.
• When the USB-C cable is connected to the monitor.