User`s guide

3 To power off the projector quickly, press the Power button and hold for 1 second
while the projector’s cooling fans are still running.
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
4 Disconnect the power cord from the electrical outlet and the projector.
Adjusting the Projected Image
Raising the Projector Height
1 Raise the projector to the desired display angle, and use the front tilt
adjustment wheel to fine-tune the display angle.
2 Use the two tilt adjustment wheels to fine-tune the display angle.
Lowering the Projector Height
1 Lower the projector, and use the front tilt adjustment wheels to fine-tune the
display angle.
1
VGA-OUT VGA-A IN VGA-B IN HDMI
USB-A DOUSB
RJ45
Composite S-Video
Mini-USB
RS232
Audio-In
Audio-Out
1
2
1 Front tilt adjustment wheel
(Angle of tilt: 0 to 4 degree)
2 1x Rear tilt adjustment wheel
Using Your Projector 31