Specifications

22 | Install the S4810
www.dell.com | support.dell.com
3 Attach the brackets to the PSU sides of the chassis using four screws for each bracket. Attach the bracket so that
the “ear” is parallel to the PSU and the outside of the chassis.
4 Attach the long bracket to each side of the chassis using the provided countersink screws. Use two screws on each
side of the chassis.
5 Install the rack mount ears into the I/O-facing posts using rack mount screws (not included with the system).
NOTE: The rack mount ears must be mounted so that the system is level when fully installed.
6 Using the provided pan head screws, attach the rack ears on the I/O facing posts to the long bracket (attached to
the system). Tighten the pan head screws to secure.
Step Task (continued)
View from chassis I/O side
View of chassis PSU side
Power Supply
Screws
Screws
Connect to
Rack/Cabine
t
(ears)
Connect to
Rack/Cabinet
(ears)
PSU Side
I/O side
Long brackets