Owner's Manual

1
4
Using the Control Panel
1 3
5
2
10
4
7
6
9
8
IR Receiver Point the remote control towards the IR receiver
and press a button.
2 Left / Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE: Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
3 Up / Keystone Press to navigate through the On-Screen Display
adjustment (OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
Right / Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
Menu Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
Using Your Projector 34
5