Users Guide

Using Your Projector 47
3 After the IP Address , Subnet Mask , Gateway , and DNS is set
up, select Store and press button to store the settings.
4 If you select Store without pressing the Enter button, the
system will keep the original settings.
RESET— Press to reset network configuration.
WIRELESS SETTINGS— Select and press to activate wireless settings. The
wireless settings menu provides the following options:
WIRELESS— If your projector wireless function is enabled, this option
will be listed on the screen as Connected.
DHCP SERVER— Allows you to enable DHCP server of the wireless.
START IP ADDRESS— Automatically or manually assigns the Start IP
address of the DHCP server to the projector connected to the wireless.
END IP ADDRESS— Automatically or manually assigns the End IP address
of the DHCP server to the projector connected to the wireless.
SUBNET MASK— Configure the Subnet Mask of the wireless connection.
GATEWAY— Check the Gateway address with your network/system
administrator if you configure it manually.
DNS— Check the DNS Server IP address with your network/system
administrator if you configure it manually.
STORE— Press to save the changes made in wireless configuration
settings.
NOTE:
1 Use and button to select IP Address, Subnet Mask,
Gateway, DNS, and Store.
2 Press the button to enter IP Address, Subnet Mask,
Gateway, or DNS to set the value. (The selected option is
highlighted in blue)
a Use and button to select the option.