Installation guide

S60 Quick Start Guide 3
This document is intended to aid you with quick installation and set-up of a new S60 system.
• For complete S60 installation information, including illustrations and display details, refer to Installing
the S60 System (included in the shipping box with the new chassis).
To install the S60 system, Force10 Networks recommends that you complete the installation procedures in
the order presented below.
1 Install the S60 chassis in a rack or cabinet
a Attach mounting brackets
b Install chassis into rack or cabinet
2. Attach ground cable
3. Insert Optional Modules
4. Supply power and power up the system
Chapter 2 Hardware Installation
Attention: Always wear an ESD-preventive wrist or heel ground strap when handling the S60 and its
components. As with all electrical devices of this type, take all the necessary safety precautions to prevent
injury when installing this system. Electrostatic discharge (ESD) damage can occur if components are
mishandled.