User's Manual

5. Lift the cover to remove it from the system.

Installing the side cover

1. First hold and align the bottom of the side cover to the chassis.

2. Ensure that the hook on the bottom of the side cover snaps into the notch on the system.

3. Press the system cover until it clicks into place.

CAUTION:

The system will not power on without the side cover. Also, the system will shut down if the side cover is

removed while the system is on.

4. Follow the procedure in After working inside your computer .

Power supply unit (PSU)

Removing the PSU

1. Follow the procedure in Before working inside your computer.

2. Disconnect the power cable from the system.

3. Press the PSU release latch [1] and slide the power supply away from the system [2].

Removing and installing components