User's Manual

Installing front input and output panel

1. Insert the input and output(I/O) panel onto its slot in the system.

2. Slide the panel to secure the hooks into the chassis hole.

3. Tighten the screw to secure the front I/O panel to the chassis.

4. Connect the following cables:

• intrusion switch cable

• USB 3.1 cable

• front I/O power cable

• USB 3.1 cable

• speaker cable

• audio cable

5. Install the:

a) front input and output bezel

b) 5.25 inch ODD bracket

c) front bezel

d) side cover

6. Follow the procedure in After working inside your computer.

Removing and installing components