User's Manual

2. Remove the side cover.
3. To remove the PCIe NVMe card:
a) Press and rotate the locking latch backward, to unlock the filler bracket [1].
b) Lift the PCIe NVMe card from the PCIe slot on the system board [2] .
Installing the PCIe NVMe card
1. Align and place the PCIe NVMe card to the PCIe slot on the system board.
2. Press it down so that it is securely seated on the slot.
3. Rotate both the locking latch forward, on the filler bracket, to secure the expansion card to the system board.
4. Install the side cover.
5. Follow the procedure in After working inside your computer.
Expansion card
Removing the expansion card
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. To remove the expansion card:
NOTE: For expansion card with VGA power, disconnect the data or power cable connected to the expansion card.
a) Press [1] and rotate the expansion card locking latch backward [2], to unlock the filler bracket.
b) Lift the expansion card [3] from the PCIe slot on the system board.
Removing and installing components
51