User`s guide

Using Diagnostics 17
Selection Options
Use this list box to organize how tests and detected devices are displayed. You can select any of the three
options from this list box.
The following table describes the icons in the Select Test(s) to Run window.
Select All: Click this button to select all the devices and tests displayed in the Select Test(s) to Run box.
Remove All: Click this button to remove all the selected devices and tests in the Select Test(s) to Run box.
Select Test(s) to Run
Use this section to select the devices and tests to be executed. The section is organized according to the
option you selected in the Selection Options list box.
If the display is grouped by devices, you can do one of the following:
• Select the check box next to the device to select all the tests listed for the device.
• Expand the device node and select the tests to be executed.
If the display is grouped by tests, you can do one of the following:
• Select the check box next to the test to select all the devices listed for the test.
• Expand the test node and select the devices on which to run the tests.
NOTE: You can select a device in the Diagnostic Information section, and view its corresponding configuration
details highlighted in the Configuration tab.
Group by connection Use this option to organize the Select Test(s) to Run box display as a tree
structure with the connection as the nodes and with the applicable devices and
the tests listed under them.
Group by device
Use this option to organize the Select Test(s) to Run box display as a tree structure with
the devices as the nodes and the tests applicable to each device listed under them. If the
device is grayed out, it implies that there are no tests available for the device. However, you
can still view the configuration details of the device.
Group by tests Use this option to organize the Select Test(s) to Run box display as a tree
structure with the tests as the nodes and the
applicable devices listed under them.
Indicates a device.
Indicates a device with a noncritical error or warning associated.
Indicates a test.
Indicates a test with a noncritical error or warning associated. A test warning
message is displayed on mouseover.