User’s Guide Dell SE2416H Model No.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury or death. _________________________ Information in this document is subject to change without notice. © 2015 Dell Inc. All rights reserved.
Contents .About your monitor................................................................. 5 Package contents................................................................................... 5 Product features.....................................................................................6 Identifying parts and controls.............................................................. 7 Plug and play capability.......................................................................
.Troubleshooting.....................................................................32 Self-Test..................................................................................................32 Built-in diagnostics..............................................................................33 Common problems...............................................................................34 Product-specific problems.................................................................36 Appendix...............
About your monitor Package contents Your monitor ships with the components shown below. Ensure that you have received all the components and see Contacting Dell for more information if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.
∞∞ Drivers and Documentation Media DellTM SE2416H Monitor ∞∞ Quick Setup Guide ∞∞ Safety and Regulatory Information Product features The Dell SE2416H flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features include: ∞∞ SE2416H: 60.47 cm (23.8 inch) viewable area display (measured diagonally). 1920 x 1080 resolution, plus full-screen support for lower resolutions.
Identifying parts and controls Front view 1 2 Front panel controls Label Description 1 Function buttons (For more information, see Operating your monitor) 2 Power On/Off button NOTE: For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
Back view SVC Tag: xxxxxxx Express Service Code: xxx xxx xxx x SVC Tag: xxxxxxx Express Service Code: xxx xxx xxx x S/N: CN-12MWY64180-341-001L -A00 S/N: CN-12MWY 64180-341-001L -A00 Date of Mfg/⫳ѻ᮹ᳳ ⫳⫶᮹ᳳ: May. 2015 Date of Mfg/⫳ѻ᮹ᳳ ⫳⫶᮹ᳳ 1 2 Back View without monitor stand Label Description 3 Back View with monitor stand Use 1 Security-lock slot Secures monitor with security lock (security lock not included).
Side view Bottom view Consumo de energía: XX.X Wh TOP VICTORY ELECTRONICS (FUJIAN) CO., LTD. Consumo de energía en modo de espera: X.XX Wh TPV Electronics (Fujian) Co., Ltd. Удельная мощность рабочего режима - X.XXX Вт/см² Потребляемая мощность изделием в режиме ожидания - X.XX Вт Потребляемая мощность изделием в выключенном режиме - X.XX Вт The equipment must be connected to an earthed mains socket-outlet. L'appareil doit être branché sur une prise de courant munie d'une mise à la terre.
Plug and play capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic, you can select different settings if desired. For more information about changing the monitor settings, see Operating your monitor.
Setting up the monitor Connecting the stand NOTE: The stand is detached when the monitor is shipped from the factory. To attach the monitor stand: 1. Place the monitor on a soft cloth or cushion. 2. Insert the tabs on the upper part of the stand in to the grooves on the back of the monitor. 3. Press down the stand till it snaps into place. 2 3 Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
Connecting the VGA cable Connecting the HDMI cable (sold separately) Organizing cables 12 | Setting up the monitor
Removing the stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft and clean surface. To remove the stand: 1. Place the monitor on a soft cloth or cushion. 2. Use a long and thin screwdriver to push the release latch. 3. Once the latch is released, remove the base away from the monitor.
Operating your monitor Power on the monitor Press the button to turn on the monitor. Using the front panel controls Use the control buttons on the front of the monitor to adjust the image being displayed. 1 2 3 4 5 The following table describes the front panel buttons: Front Panel Button Description Use this button to choose from a list of preset modes. 1 Shortcut key/Preset Modes Use this button to directly access the Brightness/ Contrast menu.
Use this button to go back to the main menu or exit the OSD main menu. 4 Exit 5 Use the Power button to turn the monitor on and off. Power (with power light ) Solid white light indicates the monitor is On and fully functional. Blinking white light indicates the power save mode. OSD controls Use the buttons on the front of the monitor to adjust the image settings. 1 2 3 4 Front Panel Button Description Use the Up button to increase values or move up in a menu.
Using the on-screen display (OSD) menu Accessing the OSD menu NOTE: Any changes you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to automatically close. 1. Press the button to display the OSD main menu.
2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor. 3. Press the 4. Press button once to activate the highlighted option. and button to select the desired parameter. 5. Press and then use the and the menu, to make your changes. 6. Select the Icon buttons, according to the indicators on button to return to the main menu.
Auto Adjust Use this key to activate automatic setup and adjust menu. Dell SE2416H Energy Use Brightness / Contrast Auto Adjust Press to adjust the screen automatically. Input Source Color Display Audio Energy Menu Personalize Others Resolution: 1024x768, 60Hz Maximum: 1920x1080, 60Hz The following dialog appears on a black screen as the monitor self-adjusts to the current input: Auto Adjustment in Progress... Auto Adjustment allows the monitor to self-adjust to the incoming video signal.
Input Source Use the Input Source menu to select between the different video signals that may be connected to your monitor. Dell SE2416H Energy Use Brightness / Contrast Auto Select Auto Adjust VGA Input Source HDMI Color Display Audio Energy Menu Personalize Others Resolution: 1024x768, 60Hz VGA Maximum: 1920x1080, 60Hz Select the VGA input when you are using the VGA connector. Press to select the VGA input source. HDMI Select the HDMI input when you are using the HDMI connectors.
Input Color Format Allows you to set the video input mode to: RGB: Select this option if your monitor is connected to a computer (or DVD player) using the VGA cable or HDMI cable. YPbPr: Select this option if your monitor is connected to a DVD player by YPbPr using the VGA cable or HDMI cable, or if the DVD color output setting is not RGB.
Preset Modes When you select Preset Modes, you can choose Standard, Multimedia, Movie, Game, Paper, Color Temp.or Custom Color from the list. ∞∞ Standard: Loads the monitor's default color settings. This is the default preset mode. ∞∞ Multimedia: Loads color settings ideal for multimedia applications. ∞∞ Movie: Loads color settings ideal for movies. ∞∞ Game: Loads color settings ideal for most gaming applications. ∞∞ Paper: Loads brightness and sharpness settings ideal for viewing text.
Saturation This feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'. to increase the monochrome appearance of the Press video image. Press image. to increase the colorful appearance of the video NOTE: Saturation adjustment is available only when you select Movie or Game preset mode. Reset Color Settings Display Resets your monitor color settings to the factory settings. Change image settings.
Energy Dell SE2416H Energy Use Brightness / Contrast Power Button LED Auto Adjust Reset Energy Settings Off During Active Input Source Color Display Audio Energy Menu Personalize Others Resolution: 1024x768, 60Hz Maximum: 1920x1080, 60Hz Power Button LED Allows you to set the power LED indicator On During Active or Off During Active to save energy. Reset Energy Settings Select this option to restore default Energy Settings.
Lock Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All keys are locked except key. NOTE: When the OSD is locked, pressing the menu key takes you directly to the OSD settings menu, with 'OSD Lock' pre-selected on entry. Press and hold key for 10 seconds to unlock and allow user access to all applicable settings. Reset Menu Settings Reset all OSD settings to the factory preset values.
Others Energy Use Dell SE2416H Brightness / Contrast DDC/CI Enable Auto Adjust LCD Conditioning Disable Input Source Reset Other Settings Color Factory Reset Reset All Settings Display Audio Energy Menu Personalize Others Resolution: 1024x768, 60Hz DDC/CI Maximum: 1920x1080, 60Hz DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance and etc.) to be adjustable via the software on your computer.
LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. To start LCD conditioning, select Enable.
OSD warning messages When the monitor does not support a resolution, the following message is displayed: Dell SE2416H The current input timing is not supported by the monitor display. Please change your input timing to 1920x1080@60Hz or any other monitor listed timing as per the monitor specifications. This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
HDMI input Dell SE2416H There is no signal coming from your computer. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button now to select the correct input source on the On-Screen-Display menu. If either VGA, HDMI input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. Dell SE2416H No HDMI Cable The display will go into Power Save Mode in 5 minutes. www. dell.
Setting up your monitor Setting the maximum resolution To set the maximum resolution for the monitor: In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the Dropdown list of the Screen Resolution and select 1920 x 1080. 4. Click OK. If you do not see 1920 x 1080 as an option, you may need to update your graphics driver.
If you have a non Dell desktop, portable computer, or graphics card In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Personalization. 3. Click Change Display Settings. 4. Click Advanced Settings. 5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 6.
Using tilt NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt NOTE: The stand is detached when the monitor is shipped from the factory.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor.
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. 1 2 3 4 5 To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2.
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms Possible Solutions No Video/Power LED off ∞∞ Ensure that the video cable connecting the monitor and the computer is properly connected and secure. ∞∞ Verify that the power outlet is functioning properly using any other electrical equipment. ∞∞ Ensure that the power button is pressed.
Geometric Distortion ∞∞ Reset the monitor to Factory Settings (Factory Reset). ∞∞ Adjust horizontal & vertical controls via OSD. Horizontal/Vertical Lines ∞∞ Reset the monitor to Factory Settings (Factory Reset). ∞∞ Perform monitor self-test feature check and determine if these lines are also in self-test mode. ∞∞ Check for bent or broken pins in the video cable connector. ∞∞ Run the built-in diagnostics. Synchronization Problems ∞∞ Reset the monitor to Factory Settings (Factory Reset).
Product-specific problems Specific Symptoms Possible Solutions Screen image is too small ∞∞ Check the Aspect Ratio setting in the Display settings OSD. ∞∞ Reset the monitor to Factory Settings(Factory Reset) . Cannot adjust the monitor with the buttons on the side panel ∞∞ Turn Off the monitor, unplug the power cord, plug it back, and then turn On the monitor. ∞∞ Check if the OSD menu is locked. If yes, press and hold the menu button for 10 seconds to unlock. (For more information, see Lock).
Appendix WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC notices (U.S. Only) and other regulatory information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance.
Monitor specifications Flat panel specifications Model SE2416H Screen type Active matrix-TFT LCD Panel type In-Plane Switching Viewable image Diagonal 604.70 mm (23.81 in) Horizontal, Active Area 527.04 mm (20.75 in) Vertical, Active Area 296.46 mm (11.67 in) Area 1562.46 cm2 (242.15 in2) Pixel pitch 0.
Supported video modes Model SE2416H Video display capabilities (HDMI ) 480p, 480i, 576p, 720p, 1080p, 576i, 1080i Preset display modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal / Vertical) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.
Physical characteristics Model SE2416H Signal cable type ∞∞ Digital: detachable, HDMI, 19 pins ∞∞ Analog: detachable, D-Sub, 15 pins Dimensions (with stand) Height 423.10 mm (16.66 in) Width 556.60 mm (21.91 in) Depth 179.90 mm (7.08 in) Dimensions (without stand) Height 330.10 mm (13.00 in) Width 556.60 mm (21.91 in) Depth 55 mm (2.17 in) Stand dimensions Height 177.00 mm (6.97 in) Width 250.00 mm (9.84 in) Depth 179.90 mm (7.08 in) Weight Weight with packaging 6.20 kg (13.
Environmental characteristics Model SE2416H Temperature Operating 0°C to 40°C (32°F to 104°F) Non-operating ∞∞ Storage ∞∞ Shipping -20°C to 60°C (-4°F to 140°F) Humidity Operating 10% to 80% (non-condensing) Non-operating ∞∞ Storage ∞∞ Shipping 10% to 90% (non-condensing) Altitude Operating (maximum) 5,000 m (16,400 ft) Non-operating (maximum) 12,192 m (40,000 ft) Thermal dissipation (maximum) (typical) ∞∞ 85.32 BTU/hour ∞∞ 68.
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation Active Active Active White 25 W (maximum)** Active-off mode Inactive Inactive Blanked White (Glowing ) Less than 0.3 W Switch off - - - Off Less than 0.3 W 20 W (typical) Energy Star On Mode Power Consumption 20 W *** ** Maximum power consumption with max luminance. *** Energy consumption (On Mode) is tested at 230 Volts / 50 Hz.
Pin assignments D-SUB connector Pin Number 15-pin Side of the Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.
HDMI connector Pin Number 19-pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
